Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Truck-Lite SS605A is a 6 oval, amber LED Stop/Tail/Turn light with two lens color options. This 24-diode LED exceeds FMVSS-P2 DOT requirements for marker and clearance performance. This light provides more visibility than incandescent, and there are no filaments to break, making them shock resistant. The quality construction ensures performance and longevity for lower overall operating costs. Available in amber or clear, the polycarbonate lens snaps in place with housing locks, and the electronics are encapsulated with epoxy for a weathertight seal.
Flush mounts 2-1/2" diameter lamps. Suitable for PC requirements on a 45-degree angle when using LED or incandescent PC-rated/combination lamps. Closed-back versions recommended for open installation where splash plate is not used.
Truck-Lite SS455 is a rectangular red Signal State LED Stop/Tail/Turn light. The light is available with 10 or 24 diodes and measures 3 x 5 . The more diodes, the brighter the light. This light can be installed horizontally or vertically and connects with a standard right angle PL-3 connector. The sealed lens is made from acrylic, and epoxy encapsulates the electronics. The quality construction ensures performance and longevity for lower overall operating costs.
Lamps operate in minor and major output levels; major function activated by the brake function or turn signal. Yellow Major function is 3 times brighter than minor function. Red Major function is 7 times brighter than minor function. Provides marker/clearance solution that requires no mounting brackets or installation screws. Lamps adhere directly to application surface through use of heavy-duty adhesive backing. Electronics are completely sealed in epoxy to resist damage caused by moisture and corrosion. Rear exit wire version requires a 3/8" mounting hole, and self-seals hole upon installation. Care should be taken for proper installation.
Keeps water, salt and other corrosives from LED lamps. Combine with LED lamps for Lifetime Lighting Warranty eligibility. 5" 16 gauge GPT wire with tin plated brass bullets/receptacles. Built as a Fit 'N Forget M/C .180 bullet terminal plug.
This light is used as a dome or utility lamp and comes with a 4 screw surface bracket mount for easy installation. Built with a raised lens for maximum output and has a push button switch.
Truck-Lite SS4051 is a 4 round red Signal-Stat LED Stop/Tail/Turn light with a clear lens. The super bright light emits 24 diodes. Epoxy-encapsulated electronics prevent damage from moisture and corrosion, and a standard PL-3 plug secures the wiring connection. The polycarbonate lens is sealed for further protection from the elements.
With 50 percent more harness ports, alleviates the need for multiple boxes, while allowing for the addition of more harness systems and increased lighting needs. Larger box makes it easier to work on internal connections. Clear lid offers easy viewing of connections without having to remove lid, saving time when trying to identify lighting system problems. Dual ''Dog bone'' ground strap feature allows 4 terminals to be common, replacing the need for multiple junction boxes, offering additional cost savings. Silicone gasket on lid helps to eliminate damage from moisture and corrosives within the box, reducing costly repairs. Made of high impact, chemical resistant, approved insulating plastic providing a long service life and eliminating the time and money needed for repair and replacement. Mounted by four eyelet-reinforced holes in base of box for increased durability. Contains 12 pre-tapped holes to accept compression fittings or filler plugs allowing for greater configuration versatility. Uses 50 Series compression fittings or 50830 filler plugs (6 included in kit).
Right angle design for use in limited space areas. 6.5" 16 gauge GPT wire with tin plated brass terminals. Built as a marker clearance PL-10 right angle plug with a stripped end and ring terminal connection.
Slim 3/4" wide design making the lamp a perfect solution for narrow rail designs. Must be mounted horizontally. SAE PC-rated for combination clearance/marker applications.
Truck-Lite SS6058 is a 6 oval, red LED Stop/Tail/Turn light with two lens color options. This 10-diode LED exceeds FMVSS-P2 DOT requirements for marker and clearance performance. This light provides more visibility than incandescent, and there are no filaments to break, making them shock resistant. The quality construction ensures performance and longevity for lower overall operating costs. The polycarbonate lens snaps in place with housing locks, and the electronics are encapsulated with epoxy for a weathertight seal.
Popular on owner/operator and show trucks. Standard PL-10 connection. Unique 13 diode starburst light output. Encapsulated electronics prevent damage from moisture and corrosion.
This standard lamp has 2 diodes. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. Electronics completely sealed in epoxy to resist corrosion and moisture.
Flush mounts 2" diameter Truck-Lite lamps.Suitable for PC requirements when using LED or incandescent PC-rated/combination lamps. Closed-back versions recommended for open installation where splash plate is not used.
Full pattern light output. Popular on show truck applications. Designed for areas with limited space. Not suitable for PC requirements. Hardwired design eliminates pin corrosion.
Designed to fit applications requiring minimal space and is less susceptible to shock and vibration. Uses standard mounting holes and accessories. Not suitable for PC applications. Draws less current, allowing more power for other vehicle requirements. Direct pin-to-circuit board solders assure vibration-resistant contacts.
30 Series low profile LED marker clearance light is designed with 6 diodes and built as a red round light with a gray flange mount. Most advanced and cost effective 2" clearance and marker lamp. LEDs have no filament, therefore are not susceptibe to shock and vibration. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. SAE PC-rated for combination clearance/marker applications.
Truck-Lite SS4050 is a 4-1/4 round, red LED Stop/Tail/Turn light. This 24-diode LED exceeds FMVSS-P2 DOT requirements for marker and clearance performance. Featuring a unique display array, this extremely bright light provides more visibility, and its quality construction ensures performance and longevity for lower overall operating costs. The polycarbonate lens and epoxy encapsulation keep moisture away from the electronics, and the grommet mount offers a clean look. Two-year warranty.
Truck-Lite 44326R is a 4 round red Super 44 LED Stop/Tail/Turn light. This light emits six diodes and includes a permanent black flange for mounting. The LED light offers faster illumination and low amp draw. A Fit N Forget PL-3 plug secures the wiring connection. The light s electronics are completely sealed in epoxy to resist corrosion and moisture, and the impact-resistant polycarbonate lens is sealed for further protection from the elements.
This light is a rugged all purpose work lamp with general purpose "work" pattern. LED light is whiter and brighter than comparabe incandescent lamps. LEDs have no filament, therefore are extremely resistant to shock and vibration LEDs have less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. Includes stainless steel mounting hardware, mounting on one 5/16"-18 stud.
Rugged all purpsoe work lamp with general purpose "work" pattern. LED light is whiter and brighter than comparable incandescent lamps. LEDs have no filment, therefore are extremely resistant to shock and vibration and also have less current draw, resulting in increased battery an alternator life while allowing more power for other vehicle requirements. Includes stainless steel mounting hardware. Mounts on one 5/16"-18 stud.