Truck-Lite

Ideal for show trucks, highway, mowing, municipal and farm equipment. Unique LED array displays full pattern output. Side marker reflex reflcetor. LEDs have no filament, therefore are extremely resistant to shock and vibration. LEDs have less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. Epoxy-encapsulated electronics protect the lamp from damage caused by chemicals and moisture.

High-impact plastic deflector mount. Design allows surface mounting of 2-1/2"" lamps. Suitable for PC requirements on a 45-degree angle when using LED or incandescent PC-rated/combination lamps.

Extra-rugged, cadmium-plated steel housing|Screw lock cover cams on/off for easy bulb replacement. Ideal for license, instrument or step lighting. Surface mounts, grounds through screw. Replaces Signal-Stat 431W. 1/4" screw hole diameter.

Popular on owner/operator and show trucks. 2 Diode (red), 3 diode (amber) LED pattern. Encapsulated electronics prevent damage from moisture and corrosion. Not suitable for PC requirements.

Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire; tin plated brass terminals. Female PL-3 Fit 'N Forget plug.

Freightliner #681-544-0503 Peterbilt #16-06291 Volvo GM #8067855|5023: Freightliner #681-544-0503 Peterbilt #16-06291 Volvo GM #8067855

Popular in trailer and body applications. Features unique plug-in design for ease of installation. Must be mounted horizontally. Low-profile, extra-strength base.

Truck-Lite SS4053 is a 4 round red Signal-Stat LED Stop/Tail/Turn light with a clear lens. The super bright light emits 24 diodes, and epoxy-encapsulated electronics prevent damage from moisture and corrosion. A standard PL-3 plug secures the wiring connection. The impact-resistant polycarbonate lens is sealed for further protection from the elements.

Most advanced and cost effective 2-1/2" clearance and marker lamp. SAE PC-rated for combination clearance/marker applications.

30 Series high profile LED marker clearance light is designed with 8 diodes and built as a red round light. Most advanced and cost effective 2" clearance and marker lamp. LEDs have no filament, therefore are not susceptible to shock and vibration. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. SAE PC-rated for combination clearance/marker application.

Truck-Lite SS6053 is a 6-1/2 oval red Signal Stat LED Stop/Tail/Turn light with a red lens. The super bright light emits 24 diodes and exceeds FMVSS-P2 DOT compliance for marker and clearance performance. Epoxy-encapsulated electronics prevent damage from moisture and corrosion, and the impact-resistant polycarbonate lens is sealed for further protection from the elements. A standard PL-3 plug secures the wiring connection.

These LED lights are built as single faced pedestal lights with one stud mount and a hardwired plug with 3 wires. Option of amber or red light with 24 diodes. Ideal for show trucks, highway mowing, municipal and farm equipment.

Popular on owner/operator show trucks. Uses standard right-angle connection. 24- diode pattern with unique LED array displaying a full pattern light output design. Epoxy-encapsulated electronics prevents damage from moisture and corrosion. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. LEDs have no filament, therefore are extremely resistant to shock and vibration Two lamps required for back-up. Legal mounted horizontally or vertically.

Ideal for show trucks, highway, mowing, municipal and farm equipment. Unique LED array displays full pattern output. Side marker reflex reflector. LEDs have no filament, therefore are extremely resistant to shock and vibration and have less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements.

Truck-Lite's 60 series amber oval auxiliary turn signal is a two function lamp and complies with SAE 592e and 2042 on both functions. Sequential Arrow with 26 diodes and auxiliary turn signal light 24V.

Lens and housing are sonically sealed. High-impact polycarbonate construction. Meets PC requirement on a 45-degree angle in mounting devices #10708, #10720, #00803 or #00804. Replaces Signal-Stat 1010 and 1011 series.

Keeps water, salt and other corrosives from LED lamps. Combine with LED lamps for Lifetime Lighting Warranty eligibility. 5" 16 gauge GPT wire with tin plated brass bullets/receptacles. Built as a Fit 'N Forget M/C .180 bullet terminal and ring terminal plug.

High-impact Permastat housing protects against rust and corrosion. Snap-on lens makes bulb and lens replacemet easy. With the two bulb design, if one burns out, the other remains lit. Lamp meets requirements with only one bulb. Not suitable for PC requirements.

Engineered to feature one bright and economical light emitting diode. Uses standard PL-10 connector. When properly mounted, exceeds FMVSS-P2 DOT requirements for marker/clearance performance. Designed with impact-resistant polycarbonate. Sealed lens and housing locks moisture out. Snap fit grommet requires no screws for installation. LEDs do not have a filament, therefore are not susceptible to shock and vibration damage, which is a major cause of failure for lamps with an incandescent bulb. Epoxy-encapsulated electronics prevents damage from moisture and corrosion. Popular on owner/operator and show trucks. Lamps come with Truck-Lite 2-year limited warranty.

Worlds smallest LED marker lamp for the transportation industry. This light provides increased visibility when braking or turning functioning as a marker, auiliary turn, and auxiliary stop when properly installed. Best in class auxiliary brake function is seven times brighter tha marker function. Marker function exceeds P2 legal requirements. The hardwired lamp with a 180 male bullet design can be easily retrofitted. LEDs draw less current, allowing more power for other vehicle requirements and have no filament, therefore are not susceptible to shock and vibration. Electronics sealed in epoxy to resist corrosion and moisture and backed with a limited lifetime warranty. Light complies with FMVSS-108 marker/clearance requirements.

Truck-Lite 6025R is a 6-1/2 oval red Signal Stat LED Stop/Tail/Turn light with a red lens. The super bright light emits 26 diodes and exceeds FMVSS 108 DOT requirements for marker and clearance performance. Epoxy-encapsulated electronics prevent damage from moisture and corrosion, and the impact-resistant polycarbonate lens is sealed for further protection from the elements. A standard PL-3 plug secures the wiring connection. Choose from grommet or flange mount.

Three face combination park, turn, side marker and reflex reflector. Bracket mount with hardware included. Mounts on 320" centers and connects with 2 spade terminals.

Ideal for show trucks, highway mowing, municipal and farm equipment. The light is built as a 1 stud mount with a hardwired plug and three wire connections, two stripped ends and a ring terminal.

Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. Faster illumination offers significant safety benefit for following drivers to react quicker, resulting in an average of 3' reaction time advantage for every 10 mph. LEDs have no filament, therefore are not susceptible to shock and vibration.

This Side Marker Light is Amber in color and for Holmes Protect style bodies. The dimensions of this light are 2 3/4" x 2 5/16".