Truck-Lite

Designed to enhance the appearance of lamps. Flange cover offers improved theft resistance. Three screws required.

Innovative optic design allows combination lamp to function as two. Draws less current, allowing more power for other vehicle requirements. Designed to fit applications requiring minimal space. Must be mounted horizontally. PC-rated lamps meets requirements when mounted on a 45-degree angle. Standard red lamps have 2 diode pattern. PC-rated red lamps and standard yellow lamps have 4 diode pattern.

High-impact black polycarbonate housing will not rust or corrode. Lamp grounds through mounting stud. Snap-grip lens simplifies bulb replacement.

30 Series high profile LED marker clearance light is designed with 8 diodes and built as a red round light with a gray flange mount. Most advanced and cost effective 2" clearance and marker lamp. LEDs have no filament, therefore are not susceptible to shock and vibration. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. SAE PC-rated for combination clearance/marker applications.

For applications with vehicle width under 80" wide. Built as a two wire, stop, tail, and trun lamp. 1 stud mounting style with a hardwired and stripped end plug. Option of amber or red incandescent lamp style.

Compact socket design with exposed terminals for easy installation in modern trailers. Extended interior plug prevents damage to shell. Integral finger grips for positive pull.

This junction box kit includes the box cap, terminal block, four filler plugs and mounting and assembly screws.

Faster illumination offers significant safety benefit for following drivers to react quicker, resulting in an average distance of 3' for every 10 mph design results in decreased depth compared to integral plug versions, allowing for mounting in confined spaces. LEDs have no filament, therefore are extremely resistant to shock and vibration and less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements.

Tough GE Noryl, non-conductive, corrosion resistant body. Floating type, cadmium-plated brass pins allow best alignment and long-lasting contact with plug|Internal connections feature a direct wired ground. Circuits are identified by color codes and embossed notations. Ring terminals are used to connect wires|Receptacle pins prevent increased resistance due to strand breakage caused by set screws.

Tough GE Noryl, non-conductive, corrosion resistant body. Floating type, cadmium-plated brass pins allow best alignment and long-lasting contact with plug|Internal connections feature a direct wired ground. Circuits are identified by color codes and embossed notations. Ring terminals are used to connect wires|Receptacle pins prevent increased resistance due to strand breakage caused by set screws.

Dual or quad flashing pattern light which meets J595 Class I on both patterns. Built with a Fit 'N Forget integral plug and option of heating elements to prevent ice and snow buildup on the lens. Light is available in both red or amber lens colors and your choice of grommet or flange mount. Option of heated lens (#TL-4467)

The light offers dual or quad flash pattern and meets recommended SAE J1318 and J845 photometric specifications. Synchronized alternating feature. Lamp life rated at 100,000 hours and is resistant to shock and vibration. Fit 'N Forget adapter plug provides corrosion and moisture resistance. Integral flange option features built-in lens.

The 90325Y lamp functions as a turn signal and features a directional arrow protection. Popular lamp for buses and emergency vehicle.

This Super 44 model is a red round stop/turn/tail LED light with Fit 'N Forget S.S. light. Faster illumination offers significant safety benefit for following drivers to react quicker, resulting in an average distance of 3' for every 10 mph. LEDs have no filament, therefore are extremely resistant to shock and vibration and also hav eless current draw, resulting in increased battery and alternator life allowing more power for other vehicle requirements.

Ford #D9HZ13405A and B (curbside). Ford #D9HZ13404A and B (roadside)|Fits 1979 and up Ford models. Freightliner #A06-13581-001 (curbside). Freightliner #A06-13581-000 (roadside)|Includes junction box cover. Rear lamp assembly combining stop, tail, turn, back-up and reflex reflector.

Dual or quad flashing pattern light which meets J595 Class I on both patterns. Built with a Fit 'N Forget integral plug and heating elements to prevent ice and snow buildup on the lens. Light is available in both red or amber lens colors and your choice of grommet or flange mount.

Tough GE Noryl, non-conductive, corrosion resistant body. Floating type, cadmium-plated brass pins allow best alignment and long-lasting contact with plug|Internal connections feature a direct wired ground. Circuits are identified by color codes and embossed notations. Ring terminals are used to connect wires|Receptacle pins prevent increased resistance due to strand breakage caused by set screws.

The light offers dual or quad flash pattern and meets recommended SAE J1318 and J845 photometric specifications. Synchronized alternating feature. Lamp life rated at 100,000 hours and is resistant to shock and vibration. Fit 'N Forget adapter plug provides corrosion and moisture resistance. Integral flange option features built-in lens.

Work pattern is ideal for light utility, construction, agricultural, airport and tow trucks, state and highway departments. Provides a brighter, crisper and whiter light output, closer to the color temperature of daylight. OmniVolt technology allows use at 9-36V without switching. Internal electronics completely encapsulated in epoxy, protecting against damaged caused by moisture and corrosion. Black powder-coated aluminum housing offers impact and corrosion resistance. Offers longer life than incandescent lamps, saving time and money on replacements. Operates from 9-36 volts without adjustment.

Rigid Perimeter Lamp 1x2 in. Rectangular LED Work Light, Black, 3 Diode, 1100 Lumen,.180 Bullet, 12-36V 65 degree horizontal spread X 69 degree vertical spread|Flat mounting surface. The light is IP68 compliant with a variety of mounting applications. Limited lifetime warranty.

This 7" Projector Headlight is built with die-cast aluminum and LED Lights. The lamps connections are hardwired and H4 - 3 blade connectors.

Super 44 series back-up light with 54 diodes. The light comes with a lifetime warranty. Built with a polycarbonate lens and Fit 'N Forget plug connection. Option of black grommet or grey flange. Grommet and flange kits come with a Female PL-2 Fit 'N Forget S.S. plug.

Super 44 series rear turn strobe lamp provides a quad flash pattern with solid state LED technology. Turn signal override feature momentarily overrides strobe function allowing lamps to signal for turn functions. Lateral system allows alternating flash patterns without the need of a separate box saving on cost and additional installation time. Fully encapsulated electronics and hard wired design protect the lamp from corrosion and damage caused by chemicals and moisture. New lamp design features a slim profile for mounting in areas of limited space. Using 2 in-phase lamps provide a synchronized flash, 1 in-phase lamp and 1 out-phase lamp provides alternating flash.