Truck-Lite

This 4x6" Projector Headlight is built with die-cast aluminum and LED Lights. The lamps connections are hardwired and H4 - 3 blade connectors.

Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire; tin plated brass terminals. The connector is a .180 bullet and ring terminal Fit 'N Forget S.S. plug.

Flush mounts the 60 Series Truck-Lite lamps. Provides lamps with additional shock absorbency to extend lamp life. TPR grommet designed for extreme environmental applications and eliminates outgassing. Semi-closed back recommended for incandescent lamps to protect lamp and wiring while allowing heat to escape. Closed back recommended for LED products only and protects against corrosion and stone damage

Uniquely designed shock mount extends lamp life. Sealed polycarbonate lens and housing resist heat and impact. Flange and flush mount grommets designed for mounting in a 4-1/2" hole. Not recommended for dome lamp use. Upgrade to LED lighting systems using Truck-Lite Super 44 Series products.

Flush mount 4" diameter lamps in a 4 1/2" hole. Designed to provide additional shock absorbence to ectend lamp life. TPR grommet designed for extreme environmnetal appliations and eliminated outgassing.

For use with double contact sealed incandescent lamps. Built as an 11" 16 gauge GPT wire with tin plated brass terminals. PL-3 stripped end and ring terminal plug.

This grease can be used to seal electrical switches to prevent dirt or water from sticking. This grease also helps prevent corrosion.

Unique shock-mount extends bulb life with 15,000-hour rated bulb life. Sealed polycarbonate lens and housing. Meets PC requirements on a 45-degree angle using all mounting devices.

High-impact polycarbonate lens and housing are sonically sealed. Heavy duty shock mounted bulb. Legal mounted vertically or horizontally. Only one lamp required to meet federal lighting regulations. Not recommended for dome lamp use.

Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. Most advanced and cost effective 2-1/2" clearance and marker lamp. SAE PC-rated for combination clearance/marker applications.

Metalized reflector version offers more intense focused light. The light offers dual or quad flash pattern and meets recommended SAE J1318 and J845 photometric specifications. Synchronized alternating feature. Lamp life rated at 100,000 hours and is resistant to shock and vibration. Fit 'N Forget adapter plug provides corrosion and moisture resistance. Integral flange option features built-in lens.

Surface mont design eliminated the need for large hole cutouts in trailer ceiling. White housing design blends well with refrigerated trailer interiors. Available with integrated on/off switch as well as externally controlled version. Lens design recesses lens ito housing to prevent damage from impact. Not affected by cold temperatures, providing flicker-free lighting with a faster start-up time. Ideal for vehicles operating in cold weather. Solid-state LED design is impervious to damage from shock and vibration. Retrofit or replacement is quick and easy. LEDs are fully encapsualted in epoxy to prevent damage caused by moisture and corrosives. Recommend 3 #10 machine screws for mounting, with torque of 15-18" lbs.

Upgrade your vehicle to LED technology, allowing significant return on your investment. LEDs have no filament, therefore are not susceptible to shock and vibration and also have less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. LEDs have faster illumination which offers a significant safety benefit for following drivers to react quicker, resulting in an average of 3 reaction time advantage for every 10 mph. Grommet provides improved water resistance between the lamp and wiring. Features stop, turn, tail, clearance, back-up and license functions; three stud mounting design with ground function.

Keeps water, salt and other corrosives from LED lamps. 8.5" 16 gauge GPT wire with tin plated brass terminals. Built with PL-3 Fit 'N Forget connections.

For use in space limited areas. 16 gauge GPT wire with tin plated brass terminals. Built as a PL-10 stripped end & ring terminal plug.

Extra strength plastic construction. Easy snap-in lamp installation. Suitable for PC requirements with incandescent lamps.

Grommet cover features chrome plated plastics to enhance appearance of lamps. Flange cover provides improved theft resistance of LED lamps. Two screws required.

Unique combination of colored LEDs with clear lens draws attention to the lamp only when lit. Electronics completely sealed in epoxy to resist corrosion and moisture. Lower power draw, allowing more power for other vehicle requirements.

Innovative optic design allows combination lamp to function as two. Draws less current, allowing more power for other vehicle requirements. Designed to fit applications requiring minimal space. Must be mounted horizontally. PC-rated lamps meets requirements when mounted on a 45-degree angle. Standard red lamps have 2 diode pattern. PC-rated red lamps and standard yellow lamps have 4 diode pattern.

Highest quality LED lighting products on the market. Most advanced and cost effective 2" clearance and marker lamp. LEDs have no filament, therefore are not susceptible to shock and vibration. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. SAE PC-rated for combination clearance/marker applications.

30 Series high profile LED marker clearance light is designed with 8 diodes and built as a red round light with a gray flange mount. Most advanced and cost effective 2" clearance and marker lamp. LEDs have no filament, therefore are not susceptible to shock and vibration. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. SAE PC-rated for combination clearance/marker applications.

Truck-Lite 4432R is a 4 round, red Super 44 LED Stop/Tail/Turn light. The six-diode light has no filament to break and is therefore extremely resistant to shock and vibration. This 12V light has a low amp draw and uses a Fit-N-Forget connection for a tighter seal. Choose from grommet mount or flange mount. This light includes a lifetime warranty.

Popular on owner/operator show trucks. Uses standard right-angle connection. Unique LED array displays a full pattern light output design. Epoxy-encapsulated electronics prevents damage from moisture and corrosion. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. Two lamps required for back-up. LEDs have no filament therefore are extremely resistant to shock and vibration.

This light is a rugged all purpose work lamp with general purpose "work" pattern. LED light is whiter and brighter than comparabe incandescent lamps. LEDs have no filament, therefore are extremely resistant to shock and vibration LEDs have less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. Includes stainless steel mounting hardware, mounting on one 5/16"-18 stud.

Truck-Lite 4422R is a 4" round red Super 44 Stop/Tail/Turn light emitting 42 diodes for extreme brightness. This light is available as a grommet mount or permanent flange mount. The LED light offers faster illumination and low amp draw. A Fit N Forget PL-3 plug secures the wiring connection. The light s electronics are completely sealed in epoxy to resist corrosion and moisture, and the impact-resistant polycarbonate lens is sealed for further protection from the elements.