Car Carrier Parts

This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan 810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.

This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par t can be used to replace Part Numbers: 8621400 and 880411500.

Spring set for Eagle wheel lifts. This part is used to replace Part Number AWS-1010-A.

This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x 3/8". It will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and 896/897. See Features for related parts and Brochures for reference charts.

This Slide Pad from Miller Industries is used in the wheel lift, underlift, and tower assemblies of several Century, Challenger, and Holmes wreckers. This slide pad measures 7" long, 3" tall, and 3/8" wide.

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,

Drop In Hydraulic Element Filter. Early style filter used until June of 2007. It is used in filter assembly

This is a Miller Industries bed lock pad for the Century 10 or 15 series prior to 2005. It has been replaced by a new bed lock weldment 12-0801209.

This is a replacement body lock hold down bracket kit for the driver side of a Chevron Car Carrier. This kit includes the left hold down bracket, the roller bearing, the thrust washer, and a nylon lock nut. To view the models this hold down kit fits see Features below.

This Gasket from Ramsey Winch is 1 used in the assembly of 4-Ton Hydraulic Winches,

This is a replacement body lock hold down bracket kit for the passenger side of a Chevron Car Carrier. This kit includes the right hold down bracket, the roller bearing, the thrust washer, and a nylon lock nut. To view the models this hold down kit fits see Features below. To view the part schematics, see the Brochure tab.

This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held in place with an allen head bolt and washer on the top.

This is a centering crossbar plate for wheel lift on the Vulcan 807, Century 300, and Holmes 440SL Series by Miller Industries.

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,

* (2) hydraulic hoses for the winch* Wiring harness for the light bar* Pre-assembled* 3/8" thick.

This is a Miller Industries license plate light. It is designed to fit any Century or Vulcan LCG Series Car Carrier. Fits into the Tail Light.

This is a replacement L-arm claw pivot pin weldment used on the wheel lift of the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL light duty wreckers by Miller Industries. This is the pin that allows the L-arm to pivot on the crossbar which secures the tire of towed vehicle. To view the part schematics please click on the Brochure tab above.

Industrial towing Ramsey shifter assembly. This shifter assembly will work with HD234, HD200 or a HDG350 Ramsey Winch.

This is the outer tube slide pad for the bottom, inside of the wheel lift on the Vulcan 810 Intruders & Century Midnight Express. See Brochures for reference chart. Each pad sold separately.

Note: Special Handling Fees Apply for Specific Items

This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.

• Option of driver or passenger position
• Fits 2" x 3" outer crosstubes
• Pivot style receivers
• Alloy construction
• Scoop style tire pan
• 4,000-lb. capacity
• Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
• Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
  

  Fits:

• Century 400 Series
• Century 600 Series
• Challenger 4700 Series
• Challenger 4800 Series<I//>

Note: Special Handling Fees Apply

This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm <a href="http://zips.com/parts-detail/miller-vulcan-scoop-lh-2-x2-8 700180" target="_blank"/>8700180</a/>. Click here for the left hand version of this wheel grid <a href="http://zips.com/parts-detail/m iller-3-5-receiver-vulcan- scoop-lh-8800800"target="_blank"/>8800800</a/>.

• Vulcan patented strapless system
• Lift rating of 4,000 lbs.
• Accepts L-Arm <a href="http://zips.com/parts-detail/miller-vulcan-scoop-lh-2-x2-8700190" target="_blank"/>8700180</a/>
• Get the right hand version of this wheel gird, <a href="http://zips.com/parts-detail/miller-3-5-receiver-vulcan-scoop-lh-8800800" target="_blank"/>8800800</a/>
  
  Fits:
  
  
• 2010-Current Vulcan Modular 804 Wreckers
• 2010-Current Vulcan Modular 806 Wreckers
• Vulcan 804, 860, 870, and 880 wheel lifts
• Vulcan car carriers

This Bearing from Ramsey Winch is used in the assembly of 4-Ton Hydraulic Winches,

This Detent Kit from Zip's will help to keep the crossbar straight. It fits Vulcan style crossbars, Vulcan Car Carrier Wheel Lifts, and Century Car Carrier Wheel Lifts with Vulcan crossbars. The kit includes a ball, spring, washers, and a threaded plug.

Pivot Pin Kit for Century 5030, 5130, 5230, 7035, 9055 and SDU underlifts with the 5" x 5" crossbar.

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.

• (6) 12-0306007 1/4"x1 1/4"x54" Bearing Pads
• (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
• (2) 12-0306032 1/4"x1 1/4"x11 1/4" Bearing Pads
• (2) 12-0306108 1/4"x1 1/4"x49 3/4" Bearing Pads
• (44) 12-0400367 1/4-20 Nylon Lock Nuts
• (44) 12-0403009 1/4-20x1" Hold Down Screws
• (10) 12-0403010 1-4-20x5/8" Self-Tapping Screws