Car Carrier Parts

This Bearing Pad from Miller Industries is used on the outer boom of wheel lift and slide-in tire restraint assemblies of Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for a list of breakdowns.

This Miller Industries part is a 7/16" lynch pin for connecting removable rails. It is also used in various other areas.

This is a Miller Industries bed lock hold-down for the driver side on Century/Vulcan Generation II car carriers. Refer to bed lock assembly 15-364220K.

This black painted steel L-Arm bracket from Miller Industries attaches to the drivers side crossbar on Vulcan 860 and 870 light-duty wreckers. Also known as a tire restraint or wheel retainer, a wheel scoop attaches to the wheel lift with this part and is held in place with a lock pin. The pin is not included. Order Part No. 8700109 for the pin. Driver side (8701600) replaces Part No. (8719440). Passenger side (8701500) replaces Part No. (8719340).

This is a Miller Industries Long Control Handle for a Car Carrier. It is the rear inner handle on a 5 spool system.

This Gasket from Ramsey Winch is used on the gear housing of 4-Ton Hydraulic Winches,

This is a Miller Industriels Long Control Handle for a Car Carrier. It the center handle on a 5 spool system. This part can be used to replace Part Number 12-0801566.

Note: Special Handling Fees Apply

This Bed Tilt Cylinder from Miller Industries is designed to withstand the necessary forces and be used at stated pressures. It meets industry and government specifications, so it will prove itself when the job really matters. It is used on the assembly of many Miller Car Carriers, including Challenger, Century, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

• Bore: 3"
• Stroke: 16.25"
• Standard color is black
• Uses Seal Kit <a href="https://zips.com/parts-detail/seal-kit-for-0302867-12-0306133" target="_blank"/>12-0306133</a/>
• Uses Cylinder Pin <a href="https://zips.com/parts-detail/pin-lift-cylinder-12-0702434" target="_blank"/>12-0702434</a/>
• Uses Snap Rings <a href="https://zips.com/parts-detail/miller-snap-ring-1-1-4-12-0301642" target="_blank"/>12-0301642</a/>
  
  Fits:
• Century 10 Series Carriers
• Century 20 Series Carriers
• Century 30 Series Carriers
• Challenger Car Carriers
• Champion 19'-21' Carriers
• Holmes 10 Series Carriers
• Vulcan 10 Series Carriers
• Vulcan 10 Series Extreme Angle Carriers

Wear Pad Kit, Vulcan 880 & 890 wheel lifts. Upper and Lower wear pads. Kit includes (1)

This Control Rod End Link from Miller Industries is used on the Control and Crossrod Assembly. It is commonly used on control rods of Century 19' Carriers. This control rod is used with Century 15 Series 2 and 3 Car Carriers, Champion Aluminum and Steel Car Carriers and Vulcan 10 Series Aluminum and Steel Car Carriers.

This is a Miller Industries bed lock hold-down for the passenger side on Century/Vulcan Generation II car carriers. Refer to bed lock assembly 15-364220K.

This is a Bed Pivot Pin from Miller Industries that is used on the bed of car carriers. It measures 38" long and has a diameter of 1-1/4". This Pivot Pin is used in the tilt frame assembly of many Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.

Pivot Pin Kit for new style Century 300 series Express wheel lift with recessed pivot pin top plate.

This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. The dimensions of this wear pad are, 5.94" L x 3" W x .38" H.This wear pad is used on the Jerr-Dan HPL-30 and HPL-60 Wreckers.

This is a Miller Industries anti-rattle spring. They are located between the control handles on the control assemblies. Sold as Each.

This is a Pivot Pin for the Swing L-Arm on a Wheel Lift Assembly. It is from Miller Industries.

This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts on Century 3212 and Holmes 600R heavy-duty wreckers. Otherwise known as a tire restraint or wheel retainer, this adjustable L-Arm fits the crosstubes on your choice of the driver or passenger side. The driver side (12-0803641) part can be used to replace Part No. (12-0904186). The passenger side (12-0803642) can be used to replace Part No. (12-0904187).

This is a Miller Industries control handle pivot rod on a 5-spool control assembly.

Pivot Pin Kit, Century Formula 6500 and Holmes DFT-650 wheel lifts. Includes (1) 12-0802903 Pivot Pin, (1) 12-0306748 Pivot Pin Bushing, (2) 12-0710092 Thrust Washers, (2) 80013 Pivot Pin Retaining Bolts, (1) 83230 Grease Zerk.

This is a Miller Industries Long Control Handle for a Car Carrier. It is the forward outer handle on a 5 spool system. This part can be used to replace Part Number 12-0800796.

This Pivot Pin Kit so for a Century Express 300 Series Wheel Lift. The kit includes one 12-0803916 Pivot Pin, one 12-0306748 Pivot Pin Bushing, two 12-0710092 Thrust Washers, two 12-0400637 Pivot Pin Retaining Bolts, two 12-0400428 Lock Nuts and one 80013 Grease Zerk.

Note: Special Handling Fees Apply

This Century style wheel grid features a T-handle screw-in style plunger pin to hold the Century style L-arm wheel retainer in place. This crosstube is designed to fit on a 3" x 3" wheel lift crossbar. Fits: Century and Champion 10 Series Car Carriers by Miller.

• Shop for the left hand version of this Outer Cross Tube, <a href="http://zips.com/parts-detail/miller-3-receiver-century-10s-std-lh-12-0905094" target="_blank"/>12-0905094</a/>
  
  Fits:
  
  
• Century 10 Series Carriers
• Champion 10 Series Carriers

This Fitting Relief from Ramsey Winch is used in the assembly of 4-Ton Hydraulic Winches,

This Bushing from Ramsey Winch is used in the assembly of 4-Ton Hydraulic Winches,

This Slider Pad from Miller Industries is an inner tube slide pad for the bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and 3/16" wide. Please see the brochure tab for a full list of breakdowns.