Car Carrier Parts

This Wheel Grid Assembly from Miller Industries is a left hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vulcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lifts, as well as Vulcan Car Carriers. This wheel grid accepts left hand L-Arm

This is a Miller Industries Control Box hood for the driver side of any Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool system and is a steel finish.

This Shifter Yoke from Ramsey Winch comes with a built in key. It is used in the assembly of 4-Ton Hydraulic Winches,

This L-Arm Assembly from Miller Industries comes with a Ratchet and Strap already bolted on. This assembly can be used on Century, Champion, and Challenger 10 Series Car Carriers, as well as, Vulcan Car Carriers that have slide-in L-Arms. This part can be used to replace Part Number 12-0900776.

This is a wheel lift wear pad for the inside, bottom of the outer stinger on Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features for related parts and Brochures for reference charts. This part can be used to replace Part Number, 9100112.

This zinc-plated mild steel L-Arm from Miller Industries fits the drivers side of Vulcan 850 and 890 series wheel lifts. Sometimes called a tire restraint or wheel retainer, the 2 square tube includes a stiffener inside for a total Working Load Limit of 6,000 lbs. This scoop also features adjustment holes for proper tire fitment, and a grated tire pan for improved grip.

Note: Special Handling Fees Apply

This zinc-plated mild steel L-Arm from Miller Industries fits both sides of the wheel lift on Century, Champion, Holmes and Vulcan car carriers. Otherwise known as a tire restraint or wheel retainer, this adjustable L-Arm slides into the outer crosstube for a secure tire rest.

• Driver or passenger position
• Zinc-plated mild steel
• Adjustment holes
  

  Fits:

• 2001-Current Century 10 Series Steel & Aluminum Carriers
• 2009-Current Century LCG 12 Series Steel & Aluminum Carriers
• 2002-Current Century 15 Series Steel & Aluminum Carriers
• 2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
• 2006-Current Century 20 Series Steel & Aluminum Carriers
• 2001-Current Champion Steel & Aluminum 19'-21' Carriers
• 2001-Current Holmes 10 Series Steel & Aluminum Carriers
• 2005-Current Vulcan 10 Series Steel & Aluminum Carriers<I//>

This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century 211/300 Series, and Holmes 440SL by Miller Industries. They are located on the top, inside of the outer stinger. See Brochures for reference chart.

This is a Miller Industries Control Box hood for the passenger side of any Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool system and is a steel finish.

This is a Miller Industries bed lock roller on Century/Vulcan Generation II car carriers. Refer to bed lock assembly 12-364220K. Each assembly includes 2 rollers.

This is an inner & outer tube bearing pad for the wheel lift of a Century or Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each equipped wheel lift. See Features for which years/models they are used on.

Miller Industries' winch loop harness assembly for 17', 16' and 19' Century, Champion and Vulcan carrier beds.

This Hex Jam Nut from Miller Industries is used on the Winch Clutch Control of 4-Ton Hydraulic Winches,

Parker VDP11 Series 3-Spool Valve Body. Fits 2010 and older. Has been used in many Miller Industries Small Wrecker Bodies.

These are the spacer bars of the wheel lift on many light duty wreckers and a few medium duty wreckers by Miller Industries. They are located on the top, inside of the outer stinger and the top, outside of the inner stinger. These spacer bars will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold separately.

This is an inner tube slide pad for the top side of the auto-grip wheel lift option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold separately.

This is a Hose Tray used on 21' bed car carriers by Miller Industries. This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is 2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan. See Features Below to see which models it will fit. This part can be used to replace Part Number 12-0720283. This part will be cut into three sections in all cases for economical shipment.

This is a flange bearing for the outer stinger weldment on the Vulcan 810 by Miller Industries. See Features for related parts and brochures for reference chart.

This is a Jerr-Dan Wheel Lift Pivot Pin Bushing. It is used on both wreckers and car carriers. This bushing is for greaseable wheel lifts. The dimensions of this bushing are 3" diameter x 2.75".

This is a replacement filter element for part number 12-0311288 filter assembly and can be used in place of part number 9018309. The filter bypass is in the element. The filtration media in this element is 10 Micron Cellulose with a dirt holding capacity of 11. This element has a 3/4" port size and a 25 PSI bypass. This is the new style filter and will fit the filter assemblies found on Century, Chevron Holmes and Vulcan Wreckers and Car Carriers.

Claw spring for Eagle wheel lifts. This spring is used to pull the claws towards each other when the wheel lift is unloaded. Attaches to left & right claws. See Brochures for schematics.

This Drag Brake Pad from Ramsey Winch is used in the assembly of 4-Ton Hydraulic Winches,

This is a Miller Industries Control Handle Knob. It is black in color and is used on a 2005 or older Series car carriers.

This is a wheel lift wear pad for the outside, top of the inner stinger on Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on the Century Express Modular 300 Series Wreckers by Miller Industries. See Features for related parts and Brochures for reference charts.

This is a Miller Industries Long Control Handle for a Car Carrier. It is the rear outer handle on a 5 spool system.