Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Car carriers and rollbacks do not make any money when their sidelined with a breakdown. Get your equipment back to work again with quality replacement parts from Zip’s AW Direct. We stock cylinders, winch drums, control assemblies and other essential hardware to facilitate your repair. We also have the necessary lighting, wiring and brackets to make sure you’re seen when you’re back out on a job.
This is a stainless steel tail light face plate for the left hand side of the Century Generation II LCG car carriers. The light configuration for this bezel is horizontal. Does not include lights or back up alarm pictured in photo. All that is included is the stainless steel face plate.
This Detent Kit from Zip's will help hold the crossbar straight when it is not loaded. It fits Century and Champion Wheel Lifts. The kit includes a ball, spring and spacer.
Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lift. Design built after March 1996 up to August 2000. Includes (1) 12-0801073 Pivot Pin, (1) 12-0303403 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and (2) 12-0701956 Pivot Pin Retaining Bolts.
This 3/4" Red Marker Light from Miller Industries comes with a Grommet. It is used for the rear marker lights on Century 10 Series Carriers and 16 Series LCG Gen II Carriers. See the brochure tab for breakdowns.
Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lift. Latest design built after August 2000. Includes (1) 12-0801073 Pivot Pin, (1) 12-0306879 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and (2) 12-0701956 Pivot Pin Retaining Bolts.
This is a Miller Industries 67.5" Control Channel Box to connect the driver and passenger side control box hoods. It is designed for all Century/Vulcan Car Carriers before 2000. It houses all the hoses / electronics for a 5-spool system and is a steel finish. This control channel box comes in 2 different lengths, 67.5"(12-0801559) and 74"(12-0720437). In order to be accurate with you part selection you should measure the length your old one to see if it matches up correctly with this 67.5" control channel box.
This Miller Industries tail light mounting bracket connects the left hand tail like housing to the subframe of the car carrier. It is bolt-on and is painted steel black. It will work for any Century or Vulcan car carrier. See Features for additional information.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' & 22' Aluminum Car Carrier. See Features for a list of parts that are included.
This is a Miller Industries 74" Control Channel Box to connect the driver and passenger side control box hoods. It is designed for all Century/Vulcan Car Carriers 2005 & newer (Excluding LCG). It houses all the hoses/electronics for a 5-spool system and is a black, steel finish.
This is a wheel lift wear pad bar for the outer stinger on light duty Vulcan wreckers by Miller Industries. There are 2 wear pads per wheel lift and they are located on the upper, outside portion of the stinger. The Vulcan models this wear pad will fit are: Vulcan Modular 880/890, 880/890, 805, 896/897. See Brochures for reference charts.
This Winch Clutch Control Assembly from Miller Industries makes reaching your Carrier Clutch Release easier than ever. It is used in the assembly of a Vulcan 10 Series Steel & Aluminum Car Carrier made after 2005. Please see the brochure tab for a breakdown.
This is a bearing pad by Miller Industries. It is one of the replacement pads for the bed of many different car carriers. See Features for dimensions and models it is equipped on. This part can be used to replace part number 12-0306108. This part is included in the following Bearing Pad Kits:
This Century style wheel grid features a T-handle screw-in style plunger pin to hold the Century style L-arm wheel retainer in place. This crosstube is designed to fit on a 3" x 3" wheel lift crossbar. Fits: Century and Champion 10 Series Car Carriers by Miller.
This is a replacement wheel lift extend cylinder shaft on LCG car carriers by Miller Industries. This is the shaft attaches the base end of the cylinder to the wheel lift outer boom weldment. To view specific models see Features below. To view the part schematics see the Brochure tab.
This is a Miller Industries bed lock hold-down for Century/Vulcan car carriers. See features for different models this part applies to. Refer to bed lock assembly 12-0940171 and 12-0905078.
This is a replacement spacer pad that bolts to the underside of the underlift boom to help the boom slide in and out efficiently. This pad is used on Century and Challenger heavy duty wreckers by Miller Industries. To view specific models this pad fits see Features below. To view the part schematics click on the Brochure tab.
This is a replacement pivot pin for Century and Holmes Autoload wreckers by Miller Industries. This pivot pin will fit the Century Modular Midnight Express, Holmes 220 Snatcher, and 440SL light duty wreckers. To view part schematics please click on the Brochures tab.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 2010 or newer 19' and 21' 10 Series Steel Car Carrier. See Features for a list of parts that are included.