Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Car carriers and rollbacks do not make any money when their sidelined with a breakdown. Get your equipment back to work again with quality replacement parts from Zip’s AW Direct. We stock cylinders, winch drums, control assemblies and other essential hardware to facilitate your repair. We also have the necessary lighting, wiring and brackets to make sure you’re seen when you’re back out on a job.
This is a stainless steel tail light mounting plate for car carriers. It is for the right hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720031.
This Amber LED Marker Light from Miller Industries is used on Century, Century LCG, Champion, and Vulcan Car Carriers. The light measures 5-1/2" long and 1" wide. It also comes with a gasket, pigtail and bulb.
This Crossbeam Pivot Pin from Miller Industries is used in the Wheel Lift and Slide-In Tire Restraint Assembly of multiple car carriers. These carriers include: Champion Aluminum and Steel Carriers, Century 10 Series Aluminum and Steel Carriers, and Century 15 Series 2 and 3 Car Carriers.
This Miller Industries tail light mounting bracket connects the right hand tail like housing to the subframe of the car carrier. It is bolt-on and is painted steel black. It will work for any Century or Vulcan car carrier. See Features for additional information.
This T Handle from Miller Industries is used in the Winch Clutch Control assembly of several Miller car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers. Also see the brochure tab for a list of breakdowns.
This is a wheel lift wear pad for the lower tilt column on Holmes and Vulcan Wreckers. This wear pad will fit on the following wrecker models: Holmes 600R, Vulcan 880/890, Modular 880/890, 896/897. See Brochures for reference charts.
This is a replacement spacer pad for the second stage of the underlift boom on Century and Challenger heavy duty wreckers by Miller Industries. This pad bolts to the underside of the underlift boom. It helps slide the boom in and out efficiently. It also catches on the wear pad mounting bracket of the next stage of the underlift boom to slide that section out. To view specific models this spacer pad fits see Features below. To view the part schematics click on the Brochure tab.
This Boom Bottom Slide Pad from Miller Industries is 15" long and 3" wide. It is used on the Boom and Outrigger Assembly of Century and Challenger Wreckers from Miller Industries. Please see the features below for a list of Wreckers and see the brochure tab for breakdowns.
This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.
This is a stop pad for the wheel lift on a Century Midnight Express by Miller Industries. It is located on multiple locations on the boom assembly on the Midnight Express.
This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts on Century car carriers and Century, Challenger and Holmes wreckers. Otherwise known as a tire restraint or wheel retainer, this adjustable L-Arm slides fits 3 x 3 cross tubes and can be used on the driver or passenger side. This part can be used to replace Part Number 12-0800841.
This is a Miller Industries bed lock welment mounting bracket for Century/Vulcan car carriers. See features for different models this part applies to. Refer to bed lock assembly 12-0940171 and 12-0905078.
Note: Special Handling Fees Apply This Bed Tilt Cylinder from Miller Industries is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. This cylinder is used on the assembly of Century 10 Series Car Carriers and Century 12 Series LCG Car Carriers. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
Black
Fits:
Century 10 Series Steel & Aluminum Carriers 2005-Current
Century LCG 12 Series Steel & Aluminum Carriers 2009-Current
This is a Miller Industries tail light face plate for the right hand side of any car carrier excluding the LCG Series. It is available in either black painted steel or stainless steel. This polished stainless steel will not rust and it uses a new style grommet type of back-up alarm. The light configuration is horizontal but vertical is also available (see part # 12-0721340).
This is the outer tube shim pad for the side, inside of the wheel lift by Miller Industries. This Shim Pad will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 400 & 600 Series, Holmes 440SL, Vulcan Modular 806, Modular 807, 812 Intruder, and Modular 880/890. See Brochures for reference chart and Features for related hardware. Each pad sold separately.
This Bottom Half Pivot Pin from Miller Industries is used in the assembly of many Miller Wreckers. These include Century, Challenger, and Holmes Wreckers. The bottom half pivot pin is attached on the bottom side of the crossbeam weldment. Please see the brochure tab for a list of breakdowns.
This is a stainless steel tail light mounting plate for car carriers. It is for the left hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720030.