Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Car carriers and rollbacks do not make any money when their sidelined with a breakdown. Get your equipment back to work again with quality replacement parts from Zip’s AW Direct. We stock cylinders, winch drums, control assemblies and other essential hardware to facilitate your repair. We also have the necessary lighting, wiring and brackets to make sure you’re seen when you’re back out on a job.
This is a stainless steel tail light mounting plate for car carriers. It is for the left hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720030.
Miller Crossbar, Century Formula wheel lift and Century & Champion carrier wheel lifts, uses WL-300K2 pivot pin kit. Fits 1996 and older Century wreckers and 2002 and older Century and Champion Car Carriers. Use 12-0803238 for newer models.
This is a hydraulic hose tensioner spring for a Vulcan 810, Century 300 Series, and Holmes 440 Series by Miller Industries. See Brochures for a reference chart and Features for related parts.
This is a Miller Industries bed lock welment for Century/Vulcan car carriers. See features for different models this part applies to. Refer to bed lock assembly 12-0940171 and 12-0905078.
This Bushing from Miller Industries is used on the Wheel Lift and Under Lift Assembly of several Miller Wreckers. These include Century, Challenger and Holmes Wreckers. The Bushing measures 3.75" tall with an outside diameter of 4" and an inside diameter of 3.5", giving it an overall thickness of .25". Please see the features below for a list of wreckers and see the brochure tab for breakdowns.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 17'6" & 19' Aluminum Car Carrier. See Features for a list of parts that are included.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 19' 10 Series Steel Car Carrier 1996 and later. See Features for a list of parts that are included.
This is an inner tube slide pad for the top side of the wheel lift on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold separately.
This is a Pivot Pin Kit for Vulcan 804, 831, 860, 870, 880, wrecker wheel lifts and all Vulcan car carrier wheel lifts 2005 or newer (3.5" crossbar). Also fits Century/Champion 10 series car carrier wheel lifts built in 2005 or later with Vulcan style crossbar. This kit includes one
This is a 66" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit
This left hand end plate from Miller industries is used on the outer crosstube assembly on various equipment from Miller Industries. This L-arm bracket is used on the new style "Pivot-L" crosstubes. This bracket attaches to the end of the crosstube to allow your L-arm to pivot.
This Cable Tensioner Assembly from Miller Industries is used on H-400 Ramsey Winch. This assembly is used on a Century 10 Series Car Carriers. Please see the brochure tab for a breakdown.
This right hand end plate from Miller industries is used on the outer crosstube assembly on various equipment from Miller Industries. This L-arm bracket is used on the new style "Pivot-L" crosstubes. This bracket attaches to the end of the crosstube to allow your L-arm to pivot.
Jerr Dan rollback wear pad kit that is compatible with AEL, RST and WAR carriers manufactured November 1991 through the current year. Also fits AWL, AVP and SVP beds manufactured October 1994 through the current year. This kit comes with all of the necessary mounting hardware and 12 total pads that have different measurements. See the features below for a list of measurements.
These Car Carrier Pylons are used with Miller Century, Champion, Challenger, Holmes, and Vulcan Rollbacks. They fit 20 and 30 LCG Series beds. These deck mounted light pylons come in a variety of heights from 48" to 68". Car Carrier Pylons are commonly used as cab protectors. See application chart under the brochures tab.
This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit 12-0940277.
This 3.5" Crossbar from Miller Industries is used in the wheel lift and slide-in tire restraint assembly of Century, Century LCG, Champion, and Vulcan Car Carriers. The crossbar uses a 3.5" x 3.5" square tube and has a built in trailer ball plate. Please see the brochure tab for a list of breakdowns.
Fits:
2005-Current Century 10 Series Steel & Aluminum Carriers
2005-Current Century 15 Series Steel & Aluminum Carriers
2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
This is a Miller Industries tail light face plate for the left hand side of any car carrier excluding the LCG Series. It is available in either black painted steel or stainless steel. This polished stainless steel will not rust and it uses a new style grommet type of back-up alarm. The light configuration is horizontal but vertical is also available (see part # 12-0721339).
This Pivot Pin Weldment from Miller Industries is used in the wheel lift assembly of Century and Vulcan Wreckers. It is also used in the boom assembly of some Century and Challenger Wreckers. Please see the brochure tab for a list of breakdowns.