Car Carrier Parts

Note: Special Handling Fees Apply

This is a 3.5" square crossbar by Miller Industries designed for Vulcan 804, 806, 860, 870, and 880 series wheel lifts and Vulcan car carrier wheel lifts. It uses VUL-880K1 pivot pin kit. See Features for related parts and brochures for reference chart. This part can be used to replace Part Number 8700150.

• 3 1/2" x 3 1/2" square tube
• Accepts 8800800 & 8800900 outer crosstubes
• Uses VUL-DK1 detent ball kit
• Vulcan 804, 806, and 880/890 Series
  
  Related Parts:
• Pivot Pin Kit VUL-880K2
• Crosstubes (CROSSTUBES3.5)

This Stop Pad from Miller Industries is used in the boom assembly of Century, and Challenger Wreckers. It is also used in the wheel lift assembly of Vulcan 810 Intruder Wreckers. The pad measures 3-3/4" in diameter, 1" tall, and 1/8" thick. Please see the brochure tab for a list of breakdowns.

Note: Special Handling Fees Apply

This is a Miller Industries full bed lock assembly. It includes everything to assemble the weldment (12-0809181), hold downs (12-0809182), mounting brackets (12-0809183), and fasteners of the bed lock. See features for different models of carriers this part applies to. This part can be used to replace Part Numbers: 12-0801209 and 12-0805054.

• Replaces part number: 12-0801205, 12-0801206
• Century/ Vulcan 10 Series 2005-Current
• Century/ Vulcan 15 Series 2005-Current
• Also replaces Assembly 12-0805054

Note: Special Handling Fees Apply

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete right hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts Right Hand Tire Restraint L-Arm, 12-0904156. Also, shop for the left hand version of this Outer Crosstube, 12-0909499L, by clicking here. Please see the brochure tab for a list of assemblies and breakdowns.

• New style Century "Pivot-L" with line-up pin
• Get the left hand version of this Outer Crosstube, 12-0909499R, by clicking here
  
  Fits
  
  
• 2005-Current Century 10 Series Steel & Aluminum Carriers
• 2009-Current Century LCG 12 Series Steel and Aluminum Carriers
• 2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
• 2009-Current Vulcan LCG 12 Series Steel & Aluminum Carriers
• 2009-Current Vulcan LCG 16 Series Steel & Aluminum Carriers

This Miller Industries product is a full assembly of the right hand side of a tail light section on a car carrier. It is designed fo r any Century 10, 12, 15, 20, or 30 Series. It includes all the necessary parts to replace the entire tail light section. This produ ct bolts onto the mounting bracket (12-0710784) which is attached to the subframe of the carrier. The replacement faceplate part number is 12-07000562. See features for additional inform ation. This part can be used to replace Part Number 12-0905007.

This is a replacement wheel lift extend cylinder shaft on LCG car carriers by Miller Industries. This is the shaft attaches the rod end of the cylinder to the wheel lift inner boom weldment. To view specific models see Features below. To view the part schematics see the Brochure tab.

This Spring Poppet from Ramsey Winch is used in the assembly of 4-Ton Hydraulic Winches,

This detent kit for Century 5030 wreckers and up helps hold the crossbar straight when the underlift is not loaded. Fits Century 5030, 5130, 5230, 7035, 9055 and SDU models.

This is a replacement 2" control lever pressure gauge by Miller Industries. This gauge has a reading up to 5,000 PSI.

Pivot Pin Kit for new style Century 300 series Express wheel lift with recessed pivot pin and 4-hole top plate.

This Miller Industries products is a full assembly of the left hand side of a tail light section on a car carrier. It is designed for any Century 10, 12, 15, 20, or 30 Series. It includes all the necessary parts to replace the entire tail light section. This product bolts onto the mounting bracket which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0905006.

Note: Special Handling Fees Apply

This Hydraulic Bed Extension Cylinder has a 3" bore, 2" rod, and it is 108" long. It is black in color and has a t-style end. This cylinder is designed to fit Challenger, Century, Champion, Holmes, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns. Truck Freight Ship Direct Only

• 3" Bore
• 2" Rod
• 108" Length
• Uses Bed Attachment Pin 12-0702434
• Uses Snap Rings 12-0301642
• Uses Seal Kit 12-0308385
  
  Fits:
• Challenger Car Carriers
• Century 10 Series Steel & Aluminum Carriers
• Century 15 Series Steel & Aluminum Carriers
• Champion Steel & Aluminum Carriers
• Holmes 10 Series Steel & Aluminum Carriers
• Vulcan 10 Series Steel & Aluminum Carriers
• Vulcan 10 Series Extreme Angle Steel Carriers

Note: Special Handling Fees Apply

This is a Miller Industries full bed lock assembly. It includes everything to assemble the weldment (15-364220), hold downs (15-3615L&R), Roller Wheels (15-36310), mounting brackets (12-0809183), and Fasteners of the bed lock. It is designed for new the Generation II LCG 12 and 16 Series car carriers.

• Century/Vulcan LCG 12 Series Generation II
• Century/Vulcan LCG 16 Series Generation II

Note: Due to size of product, additional handling charges may apply.

Blade rails used on front of 19.5' & 21.5' by MIller Industries.

This Screw from Miller Industries is used in the Winch Clutch Control assembly of several Miller car Carriers. These include Century, Champion, and Vulcan Carriers. See the features below for a full list of carriers. Also see the brochure tab for a list of breakdowns.

This is a crossbar for the Vulcan 807 Intruder, Century 300 Series, & Holmes 440SL by Miller Industries. See Features for related parts and brochures for reference chart. This part can be used to replace Part Number 12-0803917.

This is a blade rail used in mids of 21' - 22' by Miller Industries.

Wear pad kit for a 19' Century 10 series aluminum carrier. The Kit includes parts for 1 side only. This is a full length slide-in type pad that iserts into the groove in the aluminum sub-frame.

This Miller Industries LED side light is a dual-purpose light that will operate as a marker light and when the docking light function is activated, the light will operate as an LED flood light. Included with this is the flasher control power unit which allows it to function as a marker light and flasher light.

Miller Industries wear pad for the wrecker boom.

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete left hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts

This is a Miller Industries Control Box hood for the driver side of any Century/Vulcan Car Carrier 2005 & newer (Excluding LCG). It houses a 5-spool system and is a Black steel finish.