Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Car carriers and rollbacks do not make any money when their sidelined with a breakdown. Get your equipment back to work again with quality replacement parts from Zip’s AW Direct. We stock cylinders, winch drums, control assemblies and other essential hardware to facilitate your repair. We also have the necessary lighting, wiring and brackets to make sure you’re seen when you’re back out on a job.
This is a 3" right hand Outer Cross Tube from Miller Industries. It features a cam lock to hold the wheel grid onto the crossbar, a cam lock to hold the L-Arm in, and 2 hooks for a ratch & strap style hold-down. This cross tube fits 3" x 3" square crossbars. This cross tube receiver fits Century and Champion 10 Series Car Carriers.
This is a 60" tall stationary mounted cab guard for Miller Industries 12 & 16LCG series carriers. 5" x 5" x 102" base with 2" x 5" tube pylon. Factory blackpainted. Does not include turn signals, work lights, or light bar as standard.12 & 16 Series LCG - Hino 258.
This Socket Head Setscrew from Ramsey Winch is 5/16" diameter x 1/4" long with a thread size of 18. It is used in the assembly of 4-Ton Hydraulic Winches,
This Square Head Setscrew from Ramsey Winch is 1/4" diameter x 1/2" long with a thread size of 20. This setscrew is used in the assembly of 4-Ton Hydraulic Winches,
Also known as: wheel grid, slide bar, or Outer Crosstube, this left outer crosstube assembly will fit a 3" x 3" square crosstube. It has a cam lock to hold the wheel grid onto the crossbar, a black knob plunger pin to hold the L-Arm in, and 4 hooks for a basket strap style hold down. This crosstube fits the following wrecker models: Century Formula I & Holmes DFT-400. It also will fit Century & Champion 10 Series Carriers. It accepts part number 12-0903479 standard 3,500 lbs. L-Arm. This part can be used to replace Part Number 12-0800912.
This Spring from Miller Industries is used in the Winch Clutch Control assembly of several Miller car Carriers. These include Century, Champion, and Vulcan Carriers. See the features below for a full list of carriers. Also see the brochure tab for a list of breakdowns.
This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.
This is a Miller Industries Crossbar for Century, Challenger, and Holmes model wreckers. This is the new 5" x 5" Fabricated Crossbar that is used on heavy duty wreckers with underlifts. This part can be used to replace Part Number 12-0802914.
This Heat Shrink Tube, or Scuff Jacket, seals and protects cable splices, terminations, and bed hoses. This jacket is suitable for a variety of low-voltage electrical and mechanical applications, where lightweight and flexibility are important. This tube can be used on the Hydraulics Assembly of Century and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0303193.
This is a 60" long bearing pad by Miller Industries. It is one of the replacement pads for the bed of many different car carriers. See Features for dimensions and models it is equipped on. This part is included in the following Bearing Pad Kits:
This Crossbeam Pivot Pin Kit from Miller Industries is used in the Wheel Lift and Slide-In Tire Restraint Assembly of multiple car carriers. These carriers include: Champion Aluminum and Steel Carriers, Century 10 Series Aluminum and Steel Carriers, and Century 15 Series 2 and 3 Car Carriers.
Also known as a wheel grid, or slide bar, this right hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Right Hand L-Arm Tire Restraint 12-0904157. To shop for the left hand version of this receiver, 12-0904152, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902897.
This passenger side pivot-style L-Arm receiver bracket from Miller Industries attaches to the outer crosstubes on Vulcan 850 and 890 Series light-duty wrecker wheel lift assemblies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin but does not include the stop pin.
This Bell Crank from Miller Industries is used on the Winch Clutch Control assembly of several Miller Car Carriers. These include Century, Champion, and Vulcan Car Carriers. See the features below for a list of carriers that this bracket fits, and see the brochure tab for breakdowns.
This Bed Pivot Pin from Miller Industries is for the bed of car carriers. It is used in the Subframe assembly of Century and Vulcan LCG 12, 16, and Generation II 16 Series Car Carriers. Please see the brochure tab for a list of breakdowns.
This is the upper parallel arm of a formula I Wheel Lift mounted to a wrecker by Miller Industries. This part can be used to replace Part Numbers: 12-0801157, 12-0900883, and 12-0800627.
This Inner Crosstube Weldment from Miller Industries uses a 3" x 3" square tube and has a built in trailer ball plate. It is used in the wheel lift and slide-in tire restraint assembly on Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. See the brochure tab for a list of breakdowns.
Also known as a wheel grid, or slide bar, this left hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Left Hand L-Arm Tire Restraint 12-0904156. To shop for the right hand version of this receiver, 12-0904153, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902896.