Car Carrier Parts

This is a Miller Industries Control Box hood for the driver side of any Century/Vulcan Car Carrier 2005 & newer (Excluding LCG). It houses a 5-spool system and is a Black steel finish.

Note: Special Handling Fees Apply

This replacement wear pad kit fits Miller 21' LCG Car Carriers.

• Fits 21' LCG Car Carrier
• New Style
  
  

  Bearing Pad Kit Breakdown

• (2) Subframe Wear Pad - 5/16" x 36"
• (2) Subframe Nylatron Pad - 5/16" x 65"
• (2) Subframe Wear Pad - 5/16" x 96"
• (2) LCG20 Bearing Pad Steel Sill
• (42) Screws - 5/16-10 x 1 1/4"

This is a 2 Groove small sheave for the hydraulic hoses on the outer stinger weldment for a Vulcan 807/810, Century 300 Series, and Holmes 440SL by Miller Industries. See brochures for reference chart and see Features for related parts.

This is a Vertical Boom Guide pad for Century 300 Express Series, Century Modular 211, Vulcan Modular 804, Vulcan Modular 806, Vulcan Modular 807, Vulcan 805, Vulcan 810 Intruder, and Vulcan 812 Intruder by Miller Industries. See Brochures for part schematics and Features to see related parts and to see what models this will fit.

This Galvanized Tail Light Housing is for the left hand side of Century or Vulcan LCG Generation I or II Car Carriers. This shell houses all of the left hand side tail light components and the face plate. It bolts onto the mounting bracket,

Note: Special Handling Fees Apply

Note: Truck Freight Ship Direct Only

• Used in the middle of 21' - 22' beds

Note: Special Handling Fees Apply

This is a crossbar for a Century Formula I Wheel Lift Assembly. It will fit Formula I Wheel Lifts that were built in 1996 or newer. It uses a WL-300K3 pivot pin kit.

• 3" x 3" square tube
• Used on Formula I wheel lifts after March 1996
• Accepts 12-0902456 & 12-0902457 standard l-arm outer crosst ubes
• Also accepts 12-0904152 & 12-0904153 pivot l-arm outer crosstubes
• Uses WL-300DK1 detent ball kit
• Length: 53"
• Width: 4"
• H eight: 9.25"

This is a Miller Industries Control Box hood for the Passenger side of any Century/Vulcan Car Carrier 2005 & newer (Excluding LCG). It houses a 5-spool system and is a black, steel finish.

Note: Special Handling Fees Apply

This crossbar from Miller Industries can be used on Chevron Series 16, Series 20, Series 14, and Series 10 Carriers, as well as Chevron 408V/408T Renegade, 408, 408A, 410, 410A, and 512 Wreckers. It can also be used on Century LCG Generation II 16 Series Steel and Aluminum Carriers made from 2014 until now.

• 2" Center Pin (Not Included)
• Used with Century and Chevron Wheel Lifts
• Length: 56.2"
• Width: 3.5"
• Height: 9"
  
  Fits:
  
  
• Chevron 10, 14, 16, and 20 Series Carriers
• Chevron 408V/408T Renegade Wreckers
• Chevron 408, 408A, 410, 410A, and 512 Series Wreckers
• 2014-Current Century LCG Generation II 16 Series Steel & Aluminum Carriers

This is a pivot pin kit for a Century Formula 6000, 600 Series Wrecker and Century 20 Series (2006 or older) car carrier wheel lift. This kit includes one

This painted steel L-Arm bracket from Miller Industries is a replacement weldment for the wheel lift on Vulcan 896, 897 and V30 light- and medium-duty wreckers. This receiver mounts to the passenger side wheel grid and secure the L-Arm, otherwise known as a scoop, wheel retainer or tire restraint.

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 10 and 12 Series Steel LCG Car Carrier. See Features for a list of parts that are included.

• (2) 12-0308927-16 5/16"x16" LCG Subframe Bearing Pads
• (2) 12-0308927-66 5/16"x66" LCG Subframe Bearing Pads
• (2) 12-0308927-96 5/16"x96" LCG Subframe Bearing Pads
• (38) 12-0403114 1/4-20x1"x82 Deg Torx Scres
• (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 whee l lifts. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

Note: Special Handling Fees Apply

Also know as: wheel grid, slide bar, or Outer Crosstube, this outer crosstube assembly, right hand, fits Century Formula I, Holmes DFT-400. Accepts part# 12-0903479 standard 3500lbs l-arm. This part can be used to replace Part Number 12-0800913.

• Fits 3" x 3" square tube
• Century standard slide in L-arm style
• Fits Century Formula I
• Fits Holmes DFT-400
• Fits Century/Champion 10 Series Carriers

Option of driver or passenger side pivot-style l-arm receiver bracket from Miller Industries attackes to the outer crosstubes on Vulcan 870 Series light-duty wrecker wheel lift assebmlies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin and the comfort grip stop pin.

This is a crossbar pivot pin for a 3.5" Vulcan Crossbar

Wear Pad Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lifts. Kit includes stinger wear pads, and extend cylinder pins & hardware.

This Cable Tensioner Spring from Miller Industries is used on the Cable Tensioner Assembly of a standard 4-Ton Winch. This assembly can be found on a Century, Champion, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This is a Miller Industries 73" cross rod used in the control assemblies of a 10 or 15 Series Car Carrier 2001 - Current.

This is a wheel spacer weldment for the L-Arm on the wheel lift of a Holmes 440SL or Vulcan 807 by Miller Industries. This spacer can also be called a tire adapter. This spacer slides onto the end of each L-Arm. It is used when the vehicle you have to tow has low tire pressure or even no tire. This spacer will take up some of the room where the tire would normally rest allowing for a secure hook-up and tow. To view related parts see Features below. To view part schematics click on the Brochures tab.

Miller dual bonded hose is 180" long and fits on the new style Miller carriers with dual hose trays.

This is the boom pivot pin for a Vulcan 880/890 Series by Miller Industries. See Brochures for a reference chart and features for related parts.

Note: Special Handling Fees Apply

Crossbar, Vulcan 850 and 890 series wheel lifts, uses the VUL-890K1 pivot pin kit. This part can be used to replace Part Number 850020300.

• 4 X 4  square tube
• Accepts 8900400 & 8900500 outer crosstubes
• Uses VUL-DK1 detent ball kit
• Length: 64"
• Width: 4"
• Height: 8.5"

This Miller Industries product is the right hand side tail light housing for Century or Vulcan LCG Series Car Carriers (Generation I or II). Its galvanized steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.