Heavy Duty Wrecker Supply

Zacklift Chain Attachment Block. A chain block assembly pins into the end of the Zacklift crossbar allowing the crossbar to be used as a truck hitch or a tie back point for safety chains. This is a great add-on for attaching chains to the Zacklift.

The bolt-on 15 Ton Pintle Hook from Buyers Products features tough drop-forged construction and a black powder-coated finish for maximum durability and resistance to corrosion. This versatile hook can handle towing up to 30,000 lb. Each pintle hook includes mounting information, specs sheet, drilling template, and vehicle capacity decal.

Bro Wreckers receivers have 2 fork holes for easy hook-up. The outer hole is offset and gives you extra width during axle or frame lift. Shifting one receiver from passenger side to the driver s side will decrease the distance between receivers. The receiver is a low-mount design which enables the fork to sneak under low bumpers and, when inverted, gives you extra height.

The 8" stinger-to-trough clearance allows you to avoid air bags and low-mounted light brackets for an easy lift.

This is a trailer plate for pd75 from Diversified Products. Use this trailer plate/fifth wheel adapter to attach your chains to a trailer's king pin. The adapter is made from 1 1/4" solid steel plate, slotted to fit a 2" kin pin, and requires a pair of 1" anchor shackles. Shackles sold separately.

The Medium Axle Fork is used on spring, axle, cross member or frame lifts. This fork provides 6-1/2" of clearance between your cross bar and the bottom of the fork trough. 2" dia. x 4"H shaft.

Axle Forks for the Hendrickson Steertek composite axles. Specially designed for the Hendrickson Airtek/Steertek front axle. Special care must be taken when lifting the air suspension hollow beam front axles as currently being used on many of the Volvo VNT and Freightliner Century Tractors.

This 2-1/2"W Axle Fork is designed to fit snugly around the axle at the U-bolts on truck chassis like the International 4700-4900 series and similar trucks with 2-1/2" front axle width. Use for lifting at axles, springs, cross members or chassis.

Don t leave the shop without this heavy-duty front tow Starter kit from AW Direct. This entry-level package includes a Quick Connect air coupler kit to supply air to brake and suspension components on the disabled truck. The included Miller short tapered axle fork set eliminates double picks by providing just enough axle clearance on the leading edge. This essential kit also includes a pair of medium-duty tie-down straps to secure the front axle to the underlift and a cam-style steering wheel lock to prevent the front wheels from shifting while under tow. See below for kit components and individual part numbers.

10 bolt cover for the ZF rear found on Novabus and the new MCI DF45 motorcoach.

Short Forks are used for lifting axles, springs, cross members or chassis frames. Fork features a 2"D x 4"H shaft, which fits any 2" dia. securement slot. Made from high-tensile steel.

Zacklift height extenders drop into any 2" fork receiver. Any fork with a 2" shaft can be positioned in the extenders for reaching a difficult-to-reach location or for gaining extra height when towing.

This riser bracket is for a 4" by 4" crossbar used on a Century 3024 and 4024. They accept most 2" diameter forks and are used when extra height is needed for towing.

This is an offset fork holder from Miller Industries. These forks come on 25 ton and larger wreckers. This offset fork holder fits a 5" crossbar. Sold as pair.

Towing a truck or bus often means pulling the drive axles. And a lack of oil can result in burnt bearings, scorched hubs and melted seals. These Axle Caps are equipped with an oil-access hole for adding oil to the hub prior to towing to prevent damage. 30-pc. Japanese Set fits most Mitsubishi, Hino, Isuzu and Nissan truck hubs.

Zacklift Torsion Bar Fork. This Fork is Specifically Designed to lift by the torsion bar.

This is a shallow fork holder, 4" crossbar. LMD 510/512.

Axle Forks for the Hendrickson Steertek composite axles. Specially designed for the Hendrickson Airtek/Steertek front axle. Special care must be taken when lifting the air suspension hollow beam front axles as currently being used on many of the Volvo VNT and Freightliner Century Tractors. Manufactured by Bro Wreckers. These special forks have an 8" wide opening.

This is a replacement 3" x 3" fork adapter.

This Volvo Fork is designed to be used on Hendrickson Steertek axle systems. Straps must be used for tie downs instead of chains when using this tool. The fork features a 2"D x 4"H shaft that fits any 2"-dia. receiver hole. Made from high-tensile steel for strength and durability.

This multi-function accessory comes complete with a 2-5/16" ball on a 20,000 lb Pintle for trailer towing. Grab flat bed trailers with the heavy, ring-locked pintle. No tools required to use on a fifth wheel plate or a goose-neck fifth wheel travel trailer. Drop in the fifth wheel plate for empty semi trailer hauling and goose-neck fifth wheel travel trailers. The trailer hitch fifth wheel hitch drops into any 2" fork receivers.

This heavy duty wrecker lift fork kit includes 5 sets of frame forks for those unique vehicles requiring specialized lifting attachments. With the addition of this heavy duty lifting attachment kit there's nothing you won't be able to properly tow! From those pesky Gillis Buses to towing road tractors from the rear with the U-bolt attachments - this is the kit for you!

J & J Tool Company's most popular U-Joint Puller Kit, without adapters.

Phoenix Universal Lugnut Cover Pullers for 1" and Larger Lugnut Covers. For Use with Any Brand of Lugnut Covers.

With these end cap chain adapters from AW Direct you are able to convert your underlift into a tow bar. They are ideal for when you can't use forks for lifting. Use with 1/2" or 5/8" chain.