Heavy Duty Wrecker Supply

Miller Industries End Cap Chain Hook Adapter for Vulcan V30, Century 3212, and Holmes 600R 16 Ton Wreckers with low profile 3" x 4" crossbar.

Miller Industries Fork Risers for a 614. Fits a 3.5" x 3.5" Crossbar.

8 bolt Meritor hub common on later model motorcoaches (5/8" stud). HINO 268/333/338.

The Tiger Tool U-joint puller provides ultimate brute strength for disassembling even the most seized U-joints in minutes on virtually all cars, light-duty trucks, and farm machinery. This tool help eliminate dangerous vice and socket or hammering methods. It does not damage the driveshaft, yokes, joints, or bearing cups. This tool is one piece with no bolts or cables required to assemble. This U-Joint puller is for 1 ton and 2 1/2 ton trucks and autos.

This Bolt-On Corner Mounting Bracket are used on trucks without pre-fabricated brackets.

The 25 Ton Swivel Type Pintle Hook from Buyers Products has both a spring cushion and swivel action to reduce stress on towing mechanisms and allow for off-road and uneven terrain towing. The spring reduces stress upon acceleration and the swivel action allows for travel over rough terrain.

Bro Wreckers 2.5" Bus Fork is made of high-quality materials. This fork is half round and is made for MCI buses.

This zinc-plated steel replacement pivot pin is used to connect various attachments to Zip's HD Underreach Towing Adapter, including the fifth wheel plate adapter, kingpin adapter and gooseneck ball adapter. The 2" pin includes a stop lip to prevent the pin from spinning on one end and a hole for the spring retainer clip on the other. This pin ensures attachments are secure and functioning properly.

Maximize your storage space with this lifting fork storage carousel from AW Direct. This storage solution is ideal for storing most of your standard and specialty frame forks. With this system you can easily find and access just the right forks for the job at hand. The carousel is designed to be installed in the 30", 36" or 48" saddle tunnel boxes on a Century or Vulcan heavy duty wrecker or Rotator. This system can also be installed in a variety of other brands of tow truck storage compartments. Aluminum Construction. Paint is not included.

This is a Spring Shackle Adapter from Miller Industries.

Zacklift HD wheel lift 4" strap winches available in a set, drivers, or passanger side.

Towing a truck or bus often means pulling the drive axles. And a lack of oil can result in burnt bearings, scorched hubs and melted seals. These Axle Caps are equipped with an oil-access hole for adding oil to the hub prior to towing to prevent damage. Caps feature an oil-access hole that allows you to add oil to the hub prs the most commonly used medium- and large-sized covers.

This Medium Duty Truck Hitch from Miller Industries has superior strength and durability. This might be the best tow bar design ever because it incorporates the use of extra-large spacer bars, a smooth faced crossbar and cam locks on the spacer bars for easier use. The crossbar comes with 1/2" grab hooks at the end for extra heavy duty lifting, and 3/4" shackles for attaching your winch cable to. Mounting brackets sold separately.

When you can't find the right fork try our versatile 9" tall fork and use the chassis frame as lifting point as shown in the illustration. Here, one finger of the fork enters a hole in the cross member and prevents the towed vehicle from sliding. Attach your safety chains accordingly.

Heavy-duty tow operators seeking to increase traction on sidepull recoveries can purchase this newly-designed spade attachment for the H-beam outriggers on their Century rotators. Improving on the old style, engineers at Miller Industries have created more downward pressure and reduced weight by eliminating angle bracing and adopting a more vertical application for this user-friendly accessory.

The 5th Wheel Plate Adapter accept kingpins from RV & horse trailers as well as commercial trailers. Will fit most cross bars with 2" receivers. The 2 tow ball is standard, easy exchanged to a 2 5/16 tow ball allow goose neck trailers to be towed.

The "V" fork was designed for heavy construction trucks lifting by the axle. When nothing really fits try this very versatile fork.

These Tire Stand Mounts from In The Ditch are a great way to store your tire stands within easy reach. These mounts have a Cam-Lock locking feature that will hold your tire stand securely in the mount. The Cam-Lock location can be on the left or right side of the mount, specify which you prefer in the drop down option. There is also a provision on the mount so you can use a Pad Lock to protect your Tire Stand from theft.

This Towbar from Miller Industries comes complete with mounting hardware. This medium duty towbar will fit a Century Formula I and 6500. It is designed to pin into the tailboard on a Formula I or 6500 body in the existing tow sling brackets. It comes complete with hookup chains and rubber doughnuts on the crossbar to help eliminate damage.

This bolt-on under-mount bracket is specifically designed to store Miller's outrigger spade attachment on Century rotators. The steel bracket can mount near the outriggers so it's readily available when heavy-duty operators are seeking additional traction on side load recovers. Installing it under the body prevents damage from other equipment and tools and also preserves valuable storage space inside toolboxes. The bracket is powder-coated black to guard against road spray and premature corrosion.

The Tiger Tool thrust washer is a replacement part to ensure long life, reliability and warranty coverage for your

The Tiger Tool retaining bolt is a replacement part to ensure long life, reliability and warranty coverage for your

This towel dispenser is commonly mounted on the tool compartment door of heavy duty trucks. It is available in a kit that also includes a foldup washdown sink.