Century

This is a 3/8 - 16 X 3/4 flat socket head from Miller Industries.

This nylatron Slide Pad from Miller Industries is used on a horizontal boom of Miller Wreckers. It has a length of 11" and a width of 3/8".

This Miller Industries tail light mounting bracket connects the left hand tail like housing to the subframe of the car carrier. It is bolt-on and is painted steel black. It will work for any Century or Vulcan car carrier. See Features for additional information.

Upper slide pad for the inner boom on a Century F6500 wheellift.

Note: Special Handling Fees Apply for Specific Items

These Stainless Steel Door Guard Kits are from Miller. They are designed for a Century Box.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' & 22' Aluminum Car Carrier. See Features for a list of parts that are included.

Note: Special Handling Fees Apply

This is a Miller Industries 74" Control Channel Box to connect the driver and passenger side control box hoods. It is designed for all Century/Vulcan Car Carriers 2005 & newer (Excluding LCG). It houses all the hoses/electronics for a 5-spool system and is a black, steel finish.

• All Century/Vulcan Carriers 2005 & Newer
• Excludes LCG
• Black Steel
• 5-Spool
  
  Related Parts:
• 12-0809511R Passenger Side Hood
• 12-0809511L Driver Side Hood
• 12-0500426 Passenger Side Decal Plate
• 12-0500425 Driver Side Decal Plate

This is a replacement 2010 Power Actuator Assembly

This is a bearing pad by Miller Industries. It is one of the replacement pads for the bed of many different car carriers. See Features for dimensions and models it is equipped on. This part can be used to replace part number 12-0306108. This part is included in the following Bearing Pad Kits:

This pouch is made to store the T110 Remote.

This is a bushing stinger.

Note: Special Handling Fees Apply

This Century style wheel grid features a T-handle screw-in style plunger pin to hold the Century style L-arm wheel retainer in place. This crosstube is designed to fit on a 3" x 3" wheel lift crossbar. Fits: Century and Champion 10 Series Car Carriers by Miller.

• Thumbscrew to Hold Wheel Grid On
• Cam Lock to Lod L-Arm In
• 2 Hooks for Ratchet & Strap Style Hold-Down (for Safety Chains)
• Shop for the right hand version of this Outer Cross Tube, 12-0905095
  
  Fits:
  
  
• Century 10 Series Carriers
• Champion 10 Series Carriers

This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. This cylinder fits the wheel-lift lift cylinder used on both car carriers and light duty wreckers. See Features below to view specific models of each. To view part schematics click the Brochures tab. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

This is a replacement 2 wire round LED light for the control box on car carrier by Miller Industries.

This 12 Volt Motor from Miller Industries is used on Holmes 220 Generation II Wreckers. This part can be used to replace Part Number 12-0310867.

This is a replacement spacer pad that bolts to the underside of the underlift boom to help the boom slide in and out efficiently. This pad is used on Century and Challenger heavy duty wreckers by Miller Industries. To view specific models this pad fits see Features below. To view the part schematics click on the Brochure tab.

This is a replacement Miller 3/8-16X1/2 Flt Soc Hd Thrd Lok.

This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty Wreckers by Miller Industries. This seal kit will fit the lift cylinder on Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view part schematics click on the Brochures tab.

This Button Head Socket Screw from Miller Industries measures 1/4"-20 x 1/2". It is commonly used on the Wheel Lift Assembly of Century Modular 400/600 and Midnight Express Wreckers. It is also used on Vulcan Model 810 Intruder Wreckers. Use this screw with heavy duty wear pads,

This 1/8" Thrust Washer from Miller Industries is used on the Underlift Assembly of Miller Century and Challenger Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0301305.

This is a 6" boom end sheave for many Century, Challenger, Champion and Holmes Light Duty Wreckers by Miller Industries. See Brochures for part schematics and Features for related parts and to see what models this boom end sheave will fit.

This is a replacement pivot pin for Century and Holmes Autoload wreckers by Miller Industries. This pivot pin will fit the Century Modular Midnight Express, Holmes 220 Snatcher, and 440SL light duty wreckers. To view part schematics please click on the Brochures tab.

This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty Wreckers. This seal kit is for cylinder part number 12-0301755. To view what models this will fit see Features below. To view part schematics click the Brochures tab.

The light has a constant halo effect, meaning the light is constantly running. While your truck is turned on, the outer ring of the light will be lit and when you stop the middle lights will light up along side the outer lights.

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 2010 or newer 19' and 21' 10 Series Steel Car Carrier. See Features for a list of parts that are included.

• (2) 12-0308928-16 5/16"x16" Subframe Bearing Pads
• (2) 12-0308928-66 5/16"x66" Subframe Bearing Pads
• (2) 12-0308928-96 5/16"x96" Subframe Bearing Pads
• (38) 15-81007 1/4-20x1"x82 Deg Torx Scres
• (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads