Century

This is a Miller Industries control rod end cap. Instead of cotter pins, these end caps hold the control rods in place within the control assembly.

This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller Industries. This extend cylinder will fit on the following models. The Century 300 Express Series, The Century 300 Modular Express Series, The Challenger 4300 Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810 Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part schematics click the Brochure Tab.

These are the wear pads for the inner and outer booms of the wrecker. These Wear Pads will fit the following wreckers by Miller Industries: Century Express 300 Series, EB4 Express, EB4 6500, Modular Express 300 Series, Formula I, Duplex Tilt 411 & 412, Formula 6500 - 600 Series, Midnight Express, Challenger Express 4300 Series, 4700 Series, 4800 Series, Holmes 440 Series, DFT 400, HP 552, DFT 650, and Vulcan Modular 806 and 807. See Brochures for reference chart . Each Wear Pad sold separately.

Note: Special Handling Fees Apply

This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit 12-0940278.

• 5/16"x96" Subframe Pad
• 2010 & Newer 10 Series Car Carriers

This Miller Industries product is the left hand side tail light housing for Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.

This is a spacer bar that is located on the top, inside of the wheel lift outer stinger weldment by Miller Industries. This spacer bar will fit on the following wreckers: Vulcan 880/890, 805, 806, Modular 880/890, 896/897. See features for related hardware and see brochures for reference charts.

This is an outer tube Spacer pad for the wheel lift the Century and Vulcan car carriers. It is a spacer pad for (2) Bearing Pads (Part# 12-0750505) mounted on the inside of the outer tube on the wheel lift.

Safety Latch for use on safety chains.

This is Miller Industries bracket to connect the control handle to the valve body within the control assembly of a carrier.

This Immersion Filter Assembly from Miller Industries replaces the old 9018307 assembly. The filter is used on the hydraulics assembly of Vulcan 10 Series Extreme Angle Carriers and the pump, valve and filter hydraulics of Vulcan 807 Modular Wreckers. This filter is also used on the hydraulics assembly of Century 15 Series 2 and 3 Car Carriers and Century 20 Series 2, 3 and 4 Car Carriers.

This seal kit fits, Century, Holmes, and Champion Wheel-lift In/Out cylinders afer December 2002. It is a universal kit that will fit Texas (marked TH) ot Green manufactures cylinders. Please remember that seal kits may fit different c ylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0308388 and 12-0308896.

This nylatron Slide Pad from Miller Industries is used on a horizontal boom of Miller Wreckers. It has a length of 11.5" and a width of 3/8".

This Power Beyond Sleeve from Miller Industries is used to supply hydraulic power downstream to a Parker VDP11 Control Valve. This valve is typically used in Miller light duty wrecker and carriers. This part can be used to replace Part Number 9015999.

This Miller Industries product is the right hand side tail light housing for Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.

Note: Special Handling Fees Apply

This Wheel Lift Extend Cylinder from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

• Standard color is black
• Uses Seal Kit 12-0306134
  Fits:
• Century 10 Series Steel & Aluminum Carriers
• Century 15 Series Steel & Aluminum Carriers
• Century LCG 12 Series Steel & Aluminum Carriers
• Century LCG 16 Series Steel & Aluminum Carriers
• Challenger Car Carriers
• Champion Steel & Aluminum Carriers
• Holmes 10 Series Steel & Aluminum Carriers
• Vulcan 10 Series Steel & Aluminum Carriers
• Vulcan 10 Series Extreme Angle Steel Carriers

This is a replacement control handle for the new Miller Car Carriers. It is Green in color, and measures 8" long.

This 2-1/4" Slide Pad from Miller Industries is used on the outer tube Boom/Wheel Lift Assembly of Several Miller Wreckers.

This button head screw is 3/8" x 3/4".

This is a newer style Miller Industries Control Handle Knob (old Style # 12-0301429). It is grey in color and is labeled "In/Out" for wheel lift extend operations. See Features for related wreckers and Brochures for reference charts.

This 3/4" Red Marker Light from Miller Industries comes with a Grommet. It is used for the rear marker lights on Century 10 Series Carriers and 16 Series LCG Gen II Carriers. See the brochure tab for breakdowns.

This replacement Bushing from Miller Industries is used in the assembly of several Miller Century and Challenger Wreckers. It is commonly used on the SDU, and Underlift & Tower Assemblies.

This is a Miller Industries 67.5" Control Channel Box to connect the driver and passenger side control box hoods. It is designed for all Century/Vulcan Car Carriers before 2000. It houses all the hoses / electronics for a 5-spool system and is a steel finish. This control channel box comes in 2 different lengths, 67.5"(12-0801559) and 74"(12-0720437). In order to be accurate with you part selection you should measure the length your old one to see if it matches up correctly with this 67.5" control channel box.

This lower Slide Pad from Miller Industries is for the wheel lift outer boom on a Century F6500.

This Solenoid Valve is from Miller Industries This part can be used to replace Part Number 12-0304768.

This is a Miller Industries Control Handle Knob. It is grey in color and is labeled "Up/Down" for wheel lift tilt operations. See Features for related wreckers and Brochures for reference charts.