Century

This is a Miller Industriels Long Control Handle for a Car Carrier. It the center handle on a 5 spool system. This part can be used to replace Part Number 12-0801566.

This Clevis Pin from Miller Industries is used on the lift adapter assembly of Vulcan NV-50 Wrecker and a Century 7035 2-Speed Wrecker. This clevis pin is zinc plated and it measures 5/8" x 6" long. This part replaces part 12-0711002.

This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2". This sheave is used on the Boom Assembly of many Century, Challenger, Holmes, and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies and parts schematics.

This is a Miller Industries Control Handle Knob. It is black in color and is labeled "In/Out" for boom operations. See Features for related wreckers and Brochures for reference charts.

Note: Special Handling Fees Apply

This Bed Tilt Cylinder from Miller Industries is designed to withstand the necessary forces and be used at stated pressures. It meets industry and government specifications, so it will prove itself when the job really matters. It is used on the assembly of many Miller Car Carriers, including Challenger, Century, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

• Bore: 3"
• Stroke: 16.25"
• Standard color is black
• Uses Seal Kit 12-0306133
• Uses Cylinder Pin 12-0702434
• Uses Snap Rings 12-0301642
  
  Fits:
• Century 10 Series Carriers
• Century 20 Series Carriers
• Century 30 Series Carriers
• Challenger Car Carriers
• Champion 19'-21' Carriers
• Holmes 10 Series Carriers
• Vulcan 10 Series Carriers
• Vulcan 10 Series Extreme Angle Carriers

This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger, Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

This Control Rod End Link from Miller Industries is used on the Control and Crossrod Assembly. It is commonly used on control rods of Century 19' Carriers. This control rod is used with Century 15 Series 2 and 3 Car Carriers, Champion Aluminum and Steel Car Carriers and Vulcan 10 Series Aluminum and Steel Car Carriers.

This is a Bed Pivot Pin from Miller Industries that is used on the bed of car carriers. It measures 38" long and has a diameter of 1-1/4". This Pivot Pin is used in the tilt frame assembly of many Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.

This is a replacement seal kit for the swing L-arm cylinder for autoload wreckers by Miller Industries. This seal kit if for cylinder part number: 12-0303844.

This is a Pivot Pin for the Swing L-Arm on a Wheel Lift Assembly. It is from Miller Industries.

This Subframe Rail End Cap from Miller Industries is used on the Subframe Assembly of Century LCG 12 and 16 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This is a Miller Industries anti-rattle spring. They are located between the control handles on the control assemblies. Sold as Each.

This is a Miller Industries control handle pivot rod on a 5-spool control assembly.

This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.

Note: Special Handling Fees Apply

This Century style wheel grid features a T-handle screw-in style plunger pin to hold the Century style L-arm wheel retainer in place. This crosstube is designed to fit on a 3" x 3" wheel lift crossbar. Fits: Century and Champion 10 Series Car Carriers by Miller.

• Shop for the left hand version of this Outer Cross Tube, 12-0905094
  
  Fits:
  
  
• Century 10 Series Carriers
• Champion 10 Series Carriers

This is a rubber boot for a control lever on any Century or Vulcan modular wrecker by Miller Industries.

This is a Miller Industries Long Control Handle for a Car Carrier. It is the forward outer handle on a 5 spool system. This part can be used to replace Part Number 12-0800796.

Century logo rubber Mudflap 12"L x 24"W. Fits most tow trucks.

This Mudflap from Miller Industries is 2' x 2' and it comes with a Century logo printed on it. See the features below for a list of assemblies and see the brochure tab for breakdowns.

This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 104" long with a 2" stroke. This cable goes between the hydraulic control levers and the valve body. Please see Features for what models this control cable will fit.

This Slider Pad from Miller Industries is an inner tube slide pad for the bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and 3/16" wide. Please see the brochure tab for a full list of breakdowns.

This is a Miller Industries Long Control Handle for a Car Carrier. It is the forward inner handle on a 5 spool system.

Update the wiring for the exterior DOT lighting on your Century car carrier with this new harness from Miller Industries. Wiring fits up to 21'6" decks. Replaces 0302217.