Miller Industries

This Miller replacement grader blade set is used on the rear outriggers of all Century Heavy Duty Integrated Wreckers. This is the blade used on Century Wrecker Models: 4024, 5130, 5230, 7035, and 9055. Kit includes 2 blades and mounting hardware.

Can't find where the broken wire is to your taillights? Replace the wiring with this harness from Miller Industries. This part can be used to replace Part Nos.: 12-0301803 and 12-0301804.

This Miller attachment features a bearing that allows you to easily rotate a load, making it an ideal attachment to use with a rotator when trying to position equipment or machinery.

This mud flap back up strip from Miller Industries is used on light duty wreckers.

This riser bracket is for a 4" by 4" crossbar used on a Century 3024 and 4024. They accept most 2" diameter forks and are used when extra height is needed for towing.

This Motorcycle Attachment gives new versatility for the Century Express.

This is an offset fork holder from Miller Industries. These forks come on 25 ton and larger wreckers. This offset fork holder fits a 5" crossbar. Sold as pair.

This is a replacement stinger extend hydraulic tube. The tube is 3/8" and fits Vulcan V40 and V50 wreckers.

This Coupler from Miller Industries is used in the assembly of a 4-ton hydraulic winch. This winch is used on many Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers that this winch is used on. Also see the brochure tab for a list of breakdowns.

Safety Chain Roller Kit for Rotators.

Note: Special Handling Fees Apply

This Outer Right Hand Crosstube Assembly fits Century Formula 6000 and 6500 Series, Holmes DFT-650 wheel lifts, and Century 20 Series car carriers. This crosstube accepts a <a href="http://zips.com/parts-detail/miller-3-l-arm-cent-holmes-challenger-12-0802606" target="_blank"/>6,000 lb. Slide-In L-Arm, 12-0802606</a/>. You can also get a <a href="http://zips.com/parts-detail/left-outer-slide-in-crosstube-12-0904690" target="_blank"/>Left Hand Outer Slide-In Crosstube, 12-0904691, by clicking here</a/>.

• 31-1/2"
• Fits 3-1/2" x 3-1/2" square tube
• Century 6,000 lb. Slide-In L-Arm Style

This is a T-pin. It measures 5/8 in, and is for the wheel grid.

This Miller Industries Wheel Lift Anchor Spade fits Century Formula I, Holmes DFT-400, and Challenger I-400. The wheel lift spade is designed to fit over the outer tube of the wheel lift and use the downward force of the wheel lift to anchor the truck while winching.

This is a replacement 3" x 3" fork adapter.

This is a Miller Industries tail light face plate for the Right hand side of any LCG Car Carrier. It is available in stainless steel. The light configuration is horizontal.

This new approach plate roller guide attachment is for 10, 12, and 16 Series Steel car carriers. This new attachment enables 180 degrees of light-duty recovery capability at the back of the carrier. The roller guide attaches to the approach plate and fits steel car carrier beds only that are 2018 and newer. This roller guide attachment is designed to be used with 3/8" and 7/16" wire rope and it is rated for 3,500 lbs. of line pull. The roller guide attachment is engineered to the highest standards of durability, and is constructed of fabricated steel with zinc plating for corrosion resistance.

Note: Special Handling Fees Apply for Specific Items

This is a replacement fluid tube for a LCG Car Carrier by Miller Industries. This tube connects the winch motor to the under body line beneath the bed of the car carrier.

This Miller Industries shelf kit includes 3 adjustable shelves.

This is a 12" cable tensioner kit for DP Model # 52864 winches and other DP winches with a 12" wide drum.

This is a replacement stinger extend hydraulic tube. The tube is 3/8" and fits Vulcan V40 and V50 wreckers.

This is a replacement fluid tube for a LCG Car Carrier by Miller Industries. This tube connects the winch motor to the under body line beneath the bed of the car carrier.

This is a tailboard dress-up kit from Miller Industries. For this dress-up kit, you can choose from diamond plated or smooth finish accents. This aluminum dress-up kit includes the left tailgate panel, right tailgate panel, and tower panel. This dress-up kit will fit on a Century 5130 and 5230.

Miller Chain Rack for 48" Saddle Tunnel Box. Designed specifically for installation in a 48" saddle tunnel tool compartment for the Century or Vulcan Heavy Duty Wrecker line.

Stainless Steel Paddle Latch for new style toolboxes with striker pin for latch. Comes with lock. To identify this latch look for the "Made in Canada" logo on the back.