Miller Industries

This is an all aluminum 1.5" spacer for light duty tubular pylons. This spacerkit comes with all required mounting hardware and provides additional heightfor the pylon and light bar.

This is a 3" right hand Outer Cross Tube from Miller Industries. It features a cam lock to hold the wheel grid onto the crossbar, a cam lock to hold the L-Arm in, and 2 hooks for a ratch & strap style hold-down. This cross tube fits 3" x 3" square crossbars. This cross tube receiver fits Century and Champion 10 Series Car Carriers.

This is a 60" tall stationary mounted cab guard for Miller Industries 12 & 16LCG series carriers. 5" x 5" x 102" base with 2" x 5" tube pylon. Factory blackpainted. Does not include turn signals, work lights, or light bar as standard.12 & 16 Series LCG - Hino 258.

This trailer hitch adapter is for Century Formula 1 Wheel Lifts. It was manufactured before March of 1996. This adapter will allow you to tow a trailer with a ball type hitch behind your wheel lift. It installs quickly and is small enough to fit into your tool box with it is not in use. This hitch adapter comes with a 2" trailer ball, mounting bolts and a primed adapter. This trailer ball adapter also fits Holmes DFT-400 and Challenger I-400 wheel lifts that were manufactured before March of 1996 and Century/Champion car carriers that were manufactured before January 2000.

This is a control rod bushing SSB-625 for the wheel lift on the Vulcan 880 and 890 Series wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This Miller replacement grader blade is used on the rear outriggers of all Century Heavy Duty Integrated Wreckers. This is the blade used on Century Wrecker Models: 4024, 5130, 5230, 7035, and 9055.

This is a replacement New Style SMC Solenoid.

Optional 48" Shelf Kit with two dividers for 48" Aluminum Tunnel Toolbox on aluminum heavy duty wreckers.

This is a replacement bed extend cylinder pin from Miller Industries

This reflector kit is good for day or night time visibility. It contains three 17" reflective triangles packed in a heavy duty plastic case and the triangles fold flat for easy storage. The bases of the triangles can be filled with sand to hold them upright in adverse conditions.

This tail light grommet fits the Century and Vulcan 16 Series LCG '09 to '14.

This is a Miller spade weldment dock stabilizer tube. It measures 5 x 4.

Miller Industries D-Ring for Heavy Duty Wreckers. Designed for use with Century, Vulcan, & Challenger Heavy Duty Integrated and Rotator Wreckers. Requires But Does Not Include Mounting Pin (Part #GA0215). This part can be used to replace Part Number MM12B.

Also known as: wheel grid, slide bar, or Outer Crosstube, this left outer crosstube assembly will fit a 3" x 3" square crosstube. It has a cam lock to hold the wheel grid onto the crossbar, a black knob plunger pin to hold the L-Arm in, and 4 hooks for a basket strap style hold down. This crosstube fits the following wrecker models: Century Formula I & Holmes DFT-400. It also will fit Century & Champion 10 Series Carriers. It accepts part number 12-0903479 standard 3,500 lbs. L-Arm. This part can be used to replace Part Number 12-0800912.

This Spring from Miller Industries is used in the Winch Clutch Control assembly of several Miller car Carriers. These include Century, Champion, and Vulcan Carriers. See the features below for a full list of carriers. Also see the brochure tab for a list of breakdowns.

Double Banjo Eyes provide additional tie down points.

This is a 5/8", Grade 100 chain kit by Miller Industries. This kit includes (2) 10' long chains and (2) 15' long chains. Both sets of chains have grab hooks on each end.

This is a Miller Industries Crossbar for Century, Challenger, and Holmes model wreckers. This is the new 5" x 5" Fabricated Crossbar that is used on heavy duty wreckers with underlifts. This part can be used to replace Part Number 12-0802914.

These fork holders are designed to fit a 3.5" x 4" crossbar. They are a universal style fork holder and are commonly used with the Vulcan V-30 Medium Duty Wreckers.

Aluminum Crossover Tunnel Toolbox, 24" Wide x 94" Long. For Installation With A Century 211, Century Midnight, Century Express, Century FI 411/412, Century F6500 602/612, Vulcan 810, Vulcan 807, Vulcan 881/882, and Vulcan 892/894 Wrecker Units. Installation Includes A Junction Box For Connection Of The Truck Chassis Wiring With The Body. Optional Accessories (Light bars, Work Lights, Hook Up Lights, And Toolbox Lights) Will Also Be Connected To Their Respective Switch Circuits Using The Junction Box Located In The Tunnel Box. Painting Of The Tunnel Box Includes The Sanding Of The Factory Surface, Apply Epoxy Primers, and Color Coating Of PPG Poly Urethane Enamel.

Miller Industries Quick Connect Air Supply. This Quick Connect Air Supply will fit on Vulcan Larger Wrecker Models.

This is a King Pin Tow Plate Storage Bracket from Miller Industries.

Miller Industries Endless Loop Sling Package. This kit contains the following: 2 - Blue ARS 240 x 16', 2 - Red ARS 150 x 8', 2 - Red ARS 150 x 12', 2 - Yellow ARS 90 x 4', and 2 - Yellow ARS 90 x 6'.

These are bolt on aluminum tube pylon wings for heavy duty aluminum tube pylons by Miller Industries. These new style wings are designed to replace the composite pylon wings. They bolt to the side of your aluminum pylon and provide a nice, clean mounting platform for additional lights. Sold as a set which includes both the left and right wings.

This is a replacement hydraulic winch motor that runs the hydraulic assembly on most light duty modular wreckers equipped with 8,000 lb. winches from Miller Industries. This hydraulic motor is 4 cubic inches and is commonly used with 8,000 lb. winches. To view which specific models this motor will fit, see Features below. To view the part schematics, see the Brochure tab.