Miller Industries

Holmes logo rubber Mudflaps 20"L x 24"W. For use with most tow trucks.

This is a replacement wheel lift extend cylinder shaft on LCG car carriers by Miller Industries. This is the shaft attaches the rod end of the cylinder to the wheel lift inner boom weldment. To view specific models see Features below. To view the part schematics see the Brochure tab.

These Quick Release Pins from Miller Industries are used as replacement pins for ratchet assemblies on a Multicar Carrier, such as the Titan T-Series Carriers. See the brochure tab for breakdowns.

43" Extreme 3" Aluminum Aero Dynamic Pylon. Does Not Include Wrapper or Whelen H700 LED Side Lights.

Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and Recovery units (5" x 5" Crossbar). This New Tire Lift (124002808) Will Include The Upgraded Crossbar (124002838) When Ordered On With A New Wrecker Unit.

Note: Special Handling Fees Apply

This is a Miller Industries full bed lock assembly. It includes everything to assemble the weldment (15-364220), hold downs (15-3615L&R), Roller Wheels <a href="http://zips.com/parts-detail/bed-lock-roller-wheel-lcg-gen-ii-15-36310 " target="_blank"/>(15-36310)</a/>, mounting brackets <a href="http://zips.com/ parts-detail/bed-lock-mounting-bracket-10-15-series-12-0809183" target="_blank"/> (12-0809183)</a/>, and Fasteners of the bed lock. It is designed for new the Generation II LCG 12 and 16 Series car carriers.

• Century/Vulcan LCG 12 Series Generation II
• Century/Vulcan LCG 16 Series Generation II

This is a 1/4" x 1-3/4" Roll Pin that is used to secure the Swing L-Arm Pin on a Vulcan Modular 807 light duty wrecker by Miller Industries. To view the part schematic click on the Brochure tab.

One 3" bus lift strap. This part can be used to replace Part Number, 9048493.

Underlift Tie-Down Straps will give you a secure tie-down and help you avoid damage that is commonly associated with chain straps. These straps can handle 7,500 lbs. per strap.

This Trailer Hitch Adapter from Miller Industries is used on a Century Formula 6500 and Holmes DFT-650 Wheel Lift. It allows you to tow a trailer with a ball type hitch behind your wheel lift. This adapter installs quickly and it is small enough to fit in your toolbox when it is not being used.

Note: Due to size of product, additional handling charges may apply.

Blade rails used on front of 19.5' & 21.5' by MIller Industries.

In conjunction with the newly introduced Dual Fork Holders, we are also introducing a new Offset Chain Hook Adapter that is specific to the dual fork holders

Oblong Master Link. Use this link to build assemblies that meet application needs and requirements.

This Screw from Miller Industries is used in the Winch Clutch Control assembly of several Miller car Carriers. These include Century, Champion, and Vulcan Carriers. See the features below for a full list of carriers. Also see the brochure tab for a list of breakdowns.

This is a crossbar for the Vulcan 807 Intruder, Century 300 Series, & Holmes 440SL by Miller Industries. See Features for related parts and brochures for reference chart. This part can be used to replace Part Number 12-0803917.

This is a blade rail used in mids of 21' - 22' by Miller Industries.

This 7.25" Medium Round Axle Fork from Miller Industries is used to pick up the axle or frame of a truck. It has a 7.25" wide opening, 2" diameter shaft, and 6.5" between the fork holder and the bottom of the cutout.

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete left hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts

This tunnel box storage attachment from Miller Industries works with in a 36" tunnel box or a 48" tunnel box. The attachments and spreader bar tube storage are not included.

This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts on Vulcan 896 and 897 medium-duty wreckers. Also known as a tire restraint or wheel retainer, this adjustable 2" x 3" L-Arm fits the outer crosstube (Part No. 12-4008002). This adjustable L-Arm offers a capacity of 6,000 lbs. as a pair and is angled in and down more for clearance on smaller vehicles.

This Chain Rack Carousel provides the ideal storage solution for keeping your recovery chains organized and easily accessible. It is designed to be mounted in the 30", 36" or 48" saddle tunnel box on your Century rotator or heavy duty. The chain carousel allows you to hang your chains on one of the two top circular chain rings while the chains stay separated in six different pockets. The pockets feature drain holes to allow you to wash down your chains as they hang. By releasing the locking plunger pin the carousel easily rotates on a sealed bearing for easy access to all your chains.

The extensions were designed to provide extra width out of the lift fork adapters when needed. Place the extensions into the fork adapters, install the retaining bolts, slide to the desired width and it's ready to tow. Extensions sold by the pair and will only fit the low profile cast fork holders.