Miller Industries

Cast Steel Alloy Forks from Miller Industries are used when clearance is needed on a vehicle with a low front end. These forks are made in one piece using a special cast steel process. There is a 5" wide opening at the top of the fork and the shaft has a diameter or 2". There is a 9" clearance between the fork holder and the bottom of the fork cutout. The yield strength has been increased while making them almost 30% lighter than the old fork designs.

This Keyhole Plate from Miller Industries has a Banjo Eye that will accept 3/8" chain. This keyhole plate is perfect if you need to add a tie-down or replace an existing tie-down. This keyhole plate can be bolted or welded into place. This plate is 3-1/2" x 3-1/2" x 5/16" thick steel that will accept 3/8" chain.

This Left Hand Mud Flap Mounting Bracket from Miller Industries is used on the assembly of several Miller Car Carriers. These include Century, Champion, and Vulcan Carriers. Please see the features below for a list of carriers, and see the brochure tab for breakdowns.

This low pull D-Ring Kit is for a Diagonal Rear Jack-Leg for all Century Heavy Duties. D-Ring Kit includes two d-rings.

This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts on Century car carriers and Century, Challenger and Holmes wreckers. Otherwise known as a tire restraint or wheel retainer, this adjustable L-Arm slides fits 3 x 3 cross tubes and can be used on the driver or passenger side. This part can be used to replace Part Number 12-0800841.

Note: Due to size of product, additional handling charges may apply.

This is the weldment pin that connects the outer stinger to the parallel arms on a Formula I 411/412 by Miller Indstries. See brochure for reference chart.

This is a Miller Industries bed lock welment mounting bracket for Century/Vulcan car carriers. See features for different models this part applies to. Refer to bed lock assembly 12-0940171 and 12-0905078.

This short spreader bar is easy enough for one guy to handle and set up. It comes with 3 sections that are rated for 60,000 lbs. at 7'6" at 60 degrees. At full extension, 12'4", they are rated for 35,200 lbs. at 60 degrees. Size of holes are 1 1/2"

The Eagle Fork-lift Attachment. Fast, damage free, car moving machine. Turns a forklift into a fast efficient yard truck! Move cars quickly from parking spots, within storage yards or salvage lots. All you need is a forklift. Just slide the forks into the receivers and you are ready to go. No hydraulics just a simple rotating mechanism which wraps around the car tires!

This Left Side Swivel Weldment from Miller Industries is used on the Boom Swivel Assembly of several Miller Wreckers. These include Century, Challenger and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

Miller Cast Iron D-ring commonly used with small wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin for Installation (Part #BA0259).

Crosby Eliminators combine selected features and functionality of a master link, connecting link, grab hook and adjuster legs to provide you with one fitting that is suitable for applications that require an adjustable length chain sling.

This Outrigger Blade from Miller Industries is a Wheel Lift Attachments. It is used on the assembly of Century, Challenger and Holmes Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This is a stainless steel tail light mounting plate for car carriers. It is for the left hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720030.

Miller Industries newly redesigned and field-tested dual fork receiver set offers heavy-duty tow operators the advantage of four fork positions on their crossbars, allowing them to achieve the desired clearance and weight distribution on their underlifts during front-pick tows.

Miller Industries End Cap Chain Adapter for 5"x 5" Crossbar. This is part of the standard attachments for Century and Vulcan Heavy Duty Wrecker Lines. Fits 25 - 75 Ton HD Wreckers.

Miller Crossbar, Century Formula wheel lift and Century & Champion carrier wheel lifts, uses WL-300K2 pivot pin kit. Fits 1996 and older Century wreckers and 2002 and older Century and Champion Car Carriers. Use 12-0803238 for newer models.

OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant pressure against your winch drum, which makes your wire rope wind smoother.

Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.

This is a Miller light, LED license, it has a black bracket.

Note: Special Handling Fees Apply

This is a Miller Industries bed lock welment for Century/Vulcan car carriers. See features for different models this part applies to. Refer to bed lock assembly 12-0940171 and 12-0905078.

• Century/Vulcan 10 Series 2005-Current
• Century/Vulcan 15 Series 2005-Current
• Century/Vulcan LCG 16 Series
• Century/Vulcan LCG 12 Series

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 19' 10 Series Steel Car Carrier 1996 and later. See Features for a list of parts that are included.

Miller Industries' winch loop harness assembly for 21' Century and Vulcan 16 Series Generation 2 LCG Car Carriers.