Miller Industries

Tail Board Remote Switch Panel from Miller Industries. This Tail Board remote is water-proof for Controlling Underlift Functions.

38" Extreme 3" Aluminum Aero Dynamic Pylon. Does Not Include Wrapper or Whelen H700 LED Side Lights. This pylon does include 3 marker lights and 2 stop tail turn lights.

Latch Handle Only

This part can be used to replace Part Number HC0198.

This Reese Receiver Wheel Lift Adapter from Miller Industries is used on GEN2 Car Carriers. This removable adapter is specifically designed to be mounted on Miller's Century, Champion, Chevron and Vulcan conventional Car Carrier Wheel Lifts, which have the built-in ball hitch receiver/towball tongue. This 2" universal receiver accepts and pintle or ball hitch with a 2" tube. It is accepted on 10 Series,12 Series LCG and 16 Series GEN2 LCG 4K standard wheel lifts. All of the mounting hardware is included on this adapter. This part can be used to replace Part Number 12-0905029.

This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.

Compact license plate light with a polished chrome-plated housing, a mounting gasket and a replaceable bulb.

Swing Arm Style Dolly Mount Bracket-Mounts on the rear tailgate section next to the wheel lift boom allowing for better rear visibility and freeing up the upper deck area for mounting additional equipment such as fuel cans or air tanks. The swing arm is released by a camlock that allows the dollies to swing past the side or tail section for better access and the lower mounting height making them easier to lift on and off. Sold as a pair, so you get 2 dolly mounts. One for each side of your wrecker.

This is a pivot shaft for an L-Arm Bracket to the crosstube on the Century 211 by Miller Industries. See Brochures for a reference chart.

This Hex Jam Nut from Miller Industries has a 1/2" diameter with 13 threads per inch. It isused on the Winch Clutch Control of 4-Ton Hydraulic Winches, H-246 and HD-200R. This winch assembly is used on several Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers. Also see the brochure tab for a list of breakdowns.

This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.

Underlift Tie-Down Straps will give you a secure tie-down and help you avoid damage that is commonly associated with chain straps.

This is a universal 24" cross over tunnel box for heavy duty Century and Vulcan wreckers by Miller Industries.

Miller Industries dual snatch block storage kit fits 2017 and newer, and is a great way to store your snatch blocks. This snatch block mount holds 2 Snatch Blocks. Aluminum Construction with simple bolt-on installation. Snatch Blocks and Dri-Dek not included.

Tail lamp license assembly with license plate bracket & light.

Note: Special Handling Fees Apply for Specific Items

These 102" wide Car Carrier Pylons are used with Miller Century, Champion, Challenger, Holmes, and Vulcan 10 Series Rollbacks. They fit 12, 15, and 16 LCG Series beds. These frame mounted light pylons are available with a 5" x 5" or 8" x 6" base. They also come in a variety of heights from 32" to 68". Car Carrier Pylons are commonly used as cab protectors. See application chart under the brochures tab.

• Cab Protector for 10 Series Rollback Carriers
• Fit 12, 15, and 15 LCG Series beds
• Frame Mounted
• 102" wide
• Heights from 32" to 68"
• Available in 5" x 5" or 8" x 6" base
• Painted black
• Includes safety chain tie back
• Hollow tube for wiring

This is a stainless steel tail light face plate for the right hand side of the Century Generation II LCG car carriers. The light configuration for this bezel is horizontal. Does not include lights or license plate mounting hardware as pictured in photo. All that is included is the stainless steel face plate.

Towbar spring for Eagle wheel lifts. This spring is used to hold the towbar straight when the wheel lift is unloaded. Attatches to the towbar and to the inner stinger.

This is a stainless steel tail light face plate for the left hand side of the Century Generation II LCG car carriers. The light configuration for this bezel is horizontal. Does not include lights or back up alarm pictured in photo. All that is included is the stainless steel face plate.

This king pin attachment requires

This is a replacement retainer pin assembly for the Century 3224 medium duty wrecker by Miller Industries. This pin is used to hold on the fork adapters on to the wheel lift crossbar.

Immersion Filter assembly - SMF1650. It mounts on top, inside, the hydraulic tank. The filter bypass is in the filter head. Replacement element #

This Back Up Alarm from Miller Industries is used on the Tilt Frame Assembly of Challenger, Champion, Holmes, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns. This part can be used to replace Part Number 9049001.

This is a replacement crossbar positioning plate by Miller Industries. The holes in the plate are 9.25" apart. This part can be used to replace Part Number 12-0717131.