Miller Industries

Spacers for use with the Century forks from Miller Industries. This attachment was designed to be used when the front axle you are picking up is narrower than the throat of the fork you are using. Simply slide the adapter over one ear of the fork and you have created 1" narrower opening in your fork without having to carry extra attachments in your tow vehicle. Remember to always use safety chains.

Aluminum T-handle, 5/8" NC thread. Used to secure Miller Heavy Duty Wrecker Fork Receivers. Fits Century and Vulcan Heavy Duty Wrecker Attachments. This part can be used to replace Part Number 12-0800590.

This is a Miller Industries bed lock pad for the Century 10 or 15 series prior to 2005. It has been replaced by a new bed lock weldment 12-0801209.

This adapter requires

This is a centering crossbar plate for wheel lift on the Vulcan 807, Century 300, and Holmes 440SL Series by Miller Industries.

* (2) hydraulic hoses for the winch* Wiring harness for the light bar* Pre-assembled* 3/8" thick.

Note: Special Handling Fees Apply

This Pintle Hitch and Fifth Wheel Adapter from Miller Industries is designed to fit into the cast steel fork receivers. This will increase the versatility of your towing unit. Install it into the fork holders from the top of the wheel plate, or from the bottom using the King Pin Adapter. It also includes a Pintle Hook rated at 15 tons for maximum capacity when towing. This hitch also works as an adapter for the Miller Trailer Fifth Wheel Plate Part #124001833 and the Miller King Pin Attachment Part #124001948. (Does Not Fit 3212/V30) Shipped Loose. Fifth Wheel Plate and King Pin Attachments Not Included.

• Use from the top of your fork holders with the 124001833 fifth wheel plate adapter
• Use from the bottom of your fork holders with the 124001948 king pin adapter
• Includes a pintle hook rated at 30,000 lbs. for towing

This is a replacement L-arm claw pivot pin weldment used on the wheel lift of the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL light duty wreckers by Miller Industries. This is the pin that allows the L-arm to pivot on the crossbar which secures the tire of towed vehicle. To view the part schematics please click on the Brochure tab above.

Miller Industries 33" Aluminum Tubular Pylon. Available optional light pylonfor all Century and Vulcan small & medium wreckers. Requires work lights andsignals to be in the light bar.

This Flasher Control Power Unit from Miller Industries flashes all marker lights on the wrecker body. The five wire hookup requires LED lights- 10A maximum.

This Short 4-1/2" Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 4-1/2" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.

This is the outer tube slide pad for the bottom, inside of the wheel lift on the Vulcan 810 Intruders & Century Midnight Express. See Brochures for reference chart. Each pad sold separately.

The 124002634 Lift Eye Attachment is designed for front lifts on many models of the RTS, GMC, and NOVA buses and rear picks on the MCI-9. The rear eye on an MCI ,GL, and GL3 series can be utilized for a rear pick. The eyelet that is bolted on to the jack pad point on many RTS, GMC, and NOVA buses is pinned into the lift eye attachment for a front pick.

Note: Special Handling Fees Apply for Specific Items

This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.

• Option of driver or passenger position
• Fits 2" x 3" outer crosstubes
• Pivot style receivers
• Alloy construction
• Scoop style tire pan
• 4,000-lb. capacity
• Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
• Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
  

  Fits:

• Century 400 Series
• Century 600 Series
• Challenger 4700 Series
• Challenger 4800 Series<I//>

This Keyhole Plate from Miller Industries has a Double Banjo Eye that will provide an additional tie-down point. The keyhole plate can be bolted or welded into place. This plate is 5-7/8" x 7-1/2" x 3/8" thick steel that will accept up to 3/8" chain. This part can be used to replace Part Number 12-0720078.

This fork from Miller Industreis is Cast Steel Alloy. These forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.

This is a replacement air bag used on DP winch tensioners on all DP Winches.

Cast Steel Alloy Forks, these forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.

This stainless steel fenderette from Miller Industries is specifically designed for the Aluminum Body Sides of the Century Heavy Duty Wrecker Line. This fenderette is sold in one dimension and requires trimming to the proper length to fit each individual wheel well. Fits Century Integrated Wrecker Models 4024, 5130, 5230, 7035 and 9055. Also Fits Miller Industries Complete Rotator Models 1135, 1140, 1140RXP, 1150, 1150RXP, 1150R, and 1075S. This stainless steel fenderette also is compatible with Miller Industries Poly Body Line. These will also fit on some front axles of class 8 trucks, but not all. Sold Each.

Vulcan logo rubber Mudflap 16"L X 21"W. Fits most tow trucks.

This T-Handle from Miller Industries is used on the Wheel Lift Assembly of several Miller Car Carriers. Please see the features below for a list of carriers, and see the brochure tab for breakdowns.

Miller Industries 400 lbs. Counter Weight. Maximize the tow-ability of your light duty wrecker with this counter weight. Easily mounts on the front of your truck behind the front bumper. This universal counter weight is designed to fit Dodge 3500-5500, Ford F350-F550, and Chevy 3500 Cab Chassis.

This LED Flex Lamp Kit can be used with the rear fenders of a large Century or Vulcan wrecker body.

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.

• (6) 12-0306007 1/4"x1 1/4"x54" Bearing Pads
• (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
• (2) 12-0306032 1/4"x1 1/4"x11 1/4" Bearing Pads
• (2) 12-0306108 1/4"x1 1/4"x49 3/4" Bearing Pads
• (44) 12-0400367 1/4-20 Nylon Lock Nuts
• (44) 12-0403009 1/4-20x1" Hold Down Screws
• (10) 12-0403010 1-4-20x5/8" Self-Tapping Screws

This welded link is commonly used in conjunction with the cable tie-back springs on Miller Century, Vulcan and Challenger Heavy Duty Wreckers See part numbers: <a href="http://zips.com/parts-detail/century-cable-tie-back- for-hd-wreckers-945030007"target="_blank"945030007</a and <a href="http:// zips.com/parts-detail/wrecker-winch-cable-tie-spring-up-to-200-12-0302273" target="_blank" 12-0302273</a for Springs and <a href="http://zips.com/parts- detail/cable-tie-back-weldment-12-0801788"target="_blank"12-0801788<a/ or <a href="http://zips.com/parts-detail/cable-tie-back-weldment-side-winder- 12-0804054"target="_blank"12-0804054</a for the weld on bracket that holds the spring.